Tool & Garage Organization Thread
-
- 1 Star Member
- Posts: 18
- Joined: Thu Aug 20, 2015 3:47 pm
Re: Tool & Garage Organization Thread
VERY NICE
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: Tool & Garage Organization Thread
Thanks to all for nice file
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
-
- 1.5 Star Member
- Posts: 45
- Joined: Sat Jun 13, 2015 3:57 pm
Re: Tool & Garage Organization Thread
Here is a 20 can spraybomb wall mount . The holes are 16 inch on center
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 45
- Joined: Sat Jun 13, 2015 3:57 pm
Re: Tool & Garage Organization Thread
A wall mount for storing sprayBombs
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Jan 12, 2017 8:50 pm
Re: Tool & Garage Organization Thread
A 3 grinder rack with cord and disc storage. could be shrunk. 48* wide and 4* deep
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 105
- Joined: Wed Jun 01, 2016 1:53 pm
Re: Tool & Garage Organization Thread
Wow Thanks for and to all
-
- 1.5 Star Member
- Posts: 36
- Joined: Mon Apr 13, 2015 9:43 pm
Re: Tool & Garage Organization Thread
SublimeMetalworks wrote:A 3 grinder rack with cord and disc storage. could be shrunk. 48* wide and 4* deep
So which grinder wins?
-
- 3 Star Elite Contributing Member
- Posts: 289
- Joined: Wed Aug 27, 2014 12:03 pm
- Location: Shiner
Re: Tool & Garage Organization Thread
thanks for the share.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
-
- 1/2 Star Member
- Posts: 1
- Joined: Wed Mar 29, 2017 9:08 pm
Re: Tool & Garage Organization Thread
Thanks everyone for the great ideas!
-
- 2 Star Member
- Posts: 82
- Joined: Thu Apr 06, 2017 6:32 pm
Re: Tool & Garage Organization Thread
Not sure if this will give anyone some ideas but this was my most recent weld table build. It has a pull out pan for cutting small parts with the plasma you can adjust the metal bars to fit your piece. Looking to get my eagle plasma table Saturday!! Thanks everyone
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Millermatic 252
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.
-
- 2.5 Star Member
- Posts: 140
- Joined: Mon Jan 25, 2016 8:35 pm
Re: Tool & Garage Organization Thread
Very nice. Is it 4'x4'? 1/2" top? The only suggestion I have is swap the casters for ones that lock the wheel and the swivel. For those projects when you don't want the table to move.
Great job, thanks for sharing.
Great job, thanks for sharing.
-
- 2 Star Member
- Posts: 82
- Joined: Thu Apr 06, 2017 6:32 pm
Re: Tool & Garage Organization Thread
Jason yes 4x4 but its only 1/4" top it was all made with scrap steel, waiting for a 1/2" plate to be scrapped.. biggest regret is not putting locking casters on it haha but thank you!
Millermatic 252
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.
- edclayton1
- 2.5 Star Member
- Posts: 123
- Joined: Thu Sep 25, 2014 10:57 pm
- Location: Rathdrum, Idaho
Re: Tool & Garage Organization Thread
Thanks for the file share. I will try making one of these tomorrow morning. Cool idea.
Home Built 4 * 8 table
Bladerunner
Miller Syncrowave 250 TIG welder
Miller 211 Wirefeed Welder
Bridgeport Mill
Jet 13 * 40 Lathe
Hypertherm Powermax 65
80 gal 2 stage 175 PSI Emax air Compressor
Bladerunner
Miller Syncrowave 250 TIG welder
Miller 211 Wirefeed Welder
Bridgeport Mill
Jet 13 * 40 Lathe
Hypertherm Powermax 65
80 gal 2 stage 175 PSI Emax air Compressor
- trtilton61
- 2 Star Member
- Posts: 63
- Joined: Mon Jul 15, 2013 4:45 pm
Re: Tool & Garage Organization Thread
Very well designed tool organizers,Thanks.
Precision Plasma HDSE-4x8
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
-
- 1 Star Member
- Posts: 13
- Joined: Fri Mar 03, 2017 4:33 pm
Re: Tool & Garage Organization Thread
Found this thread the other day. It kept me busy trying a few files out. I ran into some problems with the Air Tool Rack and Teh Vise Grip Rack. So I cleaned them up and thought I'd post them back up. Not sure who originally made these files, but thank you so much. I got stuck making like 5 of the air too racks for various friends last weekend....
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 14
- Joined: Thu Jun 04, 2015 10:41 am
Re: Tool & Garage Organization Thread
Great ideas guys
-
- 2.5 Star Member
- Posts: 105
- Joined: Wed Jun 01, 2016 1:53 pm
-
- 1/2 Star Member
- Posts: 2
- Joined: Sun Sep 24, 2017 5:17 pm
Re: Tool & Garage Organization Thread
awesome stuff
-
- 1 Star Member
- Posts: 17
- Joined: Sun Nov 03, 2013 11:16 pm
- Location: Linden California
Re: Tool & Garage Organization Thread
Where did you get the wrench racks? I looked through this thread three times and did not see them. Thanks.dustyscustomwelding wrote:Here are some of the projects that i adapted from here. Thanks for all the ideas!
EDIT: I found this thread with some wrench racks http://plasmaspider.com/viewtopic.php?f ... ch#p128704
Also, how do you guys store box end clearance wrenches (the ones that are s shaped and u shaped)? I have yet to find a good way of organizing them in my tool box that satisfies my OCD type-A personality.
-
- 1.5 Star Member
- Posts: 25
- Joined: Thu Jan 19, 2017 12:47 pm
Re: Tool & Garage Organization Thread
Not mine, but I wanted to add it here to make this thread great again.
http://www.plasmaspider.com/viewtopic.p ... 46#p149846
http://www.plasmaspider.com/viewtopic.p ... 46#p149846
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: Tool & Garage Organization Thread
Time to cleanup the shop
Thanks
Thanks
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
-
- 1.5 Star Member
- Posts: 45
- Joined: Sat Jun 13, 2015 3:57 pm
Re: Tool & Garage Organization Thread
t-handle type from 3/8 to 1/16
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 2
- Joined: Sat Oct 13, 2018 10:09 pm
Re: Tool & Garage Organization Thread
Hello, does anyone have any racks/shelves for scrap leftovers?
Thank you,
Thank you,
-
- 2 Star Elite Contributing Member
- Posts: 61
- Joined: Tue Aug 22, 2017 4:22 pm
Re: Tool & Garage Organization Thread
Thanks to everyone for helping keep shop tidy!!
-
- 1.5 Star Member
- Posts: 45
- Joined: Mon Apr 22, 2019 12:07 am
Re: Tool & Garage Organization Thread
Thank you for sharing! I was going to post a picture of my grinder rack but I cannot find a picture on this computer. Hopefully I can post one later.