Hypertherm 600 and 3/8ths hr

[AIRFLOWKID]

Jim,
I have a hypertherm 600. I am going to be cutting out some crosses using 3/8ths hr. I'm I O.K. with fine cut or should I switch?

Thanks so much, Tim A Reamer
DHC
Hypertherm 600

[jimcolt]

The maximum thickness that the FineCut consumables should be used for is 1/8".....for 3/8" use the 40 amp shielded consumables.

Jim Colt

[AIRFLOWKID]

Thanks Jim


Sincerely,
Tim Reamer