Elite Member Contest - WINNER
- admin
- Site Admin
- Posts: 366
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Elite Member Contest - WINNER
Ok I think were done with that pesky login issue...WHEW...what a pain! Sorry about that. Hope everyone's good now.
I want to give a big thank you to everyone who participates, shares, and helps out other members when they can.
No one does this more than our Elite Members and we haven't had a giveaway for our Elite Members for a while so get yourself entered in this one.
To enter you must be an Elite Member. Just reply to this thread and list what brand and model of plasma cutter your currently using and that's it.
At a date still to be determined we will randomly select an Elite Member and announce the prize
I want to give a big thank you to everyone who participates, shares, and helps out other members when they can.
No one does this more than our Elite Members and we haven't had a giveaway for our Elite Members for a while so get yourself entered in this one.
To enter you must be an Elite Member. Just reply to this thread and list what brand and model of plasma cutter your currently using and that's it.
At a date still to be determined we will randomly select an Elite Member and announce the prize
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Thanks for the resolution! Been working well for a couple days!!
I use a Hypertherm 65 with mini machine torch on my Samson(PlasmaCAM) 5x10 table.
I use a Hypertherm 65 with mini machine torch on my Samson(PlasmaCAM) 5x10 table.
Robert Johnson
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1958
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Elite Member Contest - Surprise Giveaway
How does one become an elite member?
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 2.5 Star Member
- Posts: 126
- Joined: Mon Feb 22, 2010 9:01 am
Re: Elite Member Contest - Surprise Giveaway
I have a Hypertherm 600 with the updated torch and a Hypertherm Powermax 45 with the machine torch on a Plasmacam DHC
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Elite Member Contest - Surprise Giveaway
I have a Hypertherm 65 with both torches
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- Rem300wm
- 3 Star Elite Contributing Member
- Posts: 262
- Joined: Sat Feb 13, 2010 12:33 am
Re: Elite Member Contest - Surprise Giveaway
Hello to All
I have a Hypertherm 45 with machine torch
I have a Hypertherm 45 with machine torch
- admin
- Site Admin
- Posts: 366
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Elite Members are active members who have been registered for 1 year or more and make regular contributions to the site by means of helping others, sharing knowledge, sharing files, etc. Myself and moderators take time to maintain the site each day and during this time we notice member activity and select members to be in the Elite group. There is no real system other than that to select members so I know some deserving members are being overlooked. I have just added you to the groupdjreiswig wrote:How does one become an elite member?
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Torchmate 3 6x14 table, Thermal Dynamics A101 plasma.
Thank you for digging in and getting the login issue fixed....and thanks for such an awesome forum for all of us to enjoy.
Thank you for digging in and getting the login issue fixed....and thanks for such an awesome forum for all of us to enjoy.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1958
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Elite Member Contest - Surprise Giveaway
Thanks admin. Much appreciated. I'm flattered.
I've got a Hypertherm 65 on a 4x8 Bulltear table.
I've got a Hypertherm 65 on a 4x8 Bulltear table.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- East German
- 4 Star Elite Contributing Member
- Posts: 587
- Joined: Sat Jan 05, 2013 8:21 am
- Location: Stapelburg Germany
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 1000 hand torch / 1100 machine and handtorch / 85 machine torch
Peter
Peter
Sorry for my language! The last English class was in 1982.
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
- John Frantum
- 2.5 Star Member
- Posts: 156
- Joined: Fri Apr 01, 2016 6:42 am
Re: Elite Member Contest - Surprise Giveaway
Hello,
I have nothing....yes, nothing, except for an inexpensive CAD program and computer.
I work in a sheet metal shop that has a laser, and pay dearly for cutting time, and am always at the bottom of the queue in scheduling.
I am hoping to, in the next month or so, buy a house with enough shop area to set up a plasma table, TIG welder and other basic pieces of equipment, but I'm not there yet.
Thanks for allowing me to share and for sharing files with me, it has helped a great deal in reaching my goals.
John
I have nothing....yes, nothing, except for an inexpensive CAD program and computer.
I work in a sheet metal shop that has a laser, and pay dearly for cutting time, and am always at the bottom of the queue in scheduling.
I am hoping to, in the next month or so, buy a house with enough shop area to set up a plasma table, TIG welder and other basic pieces of equipment, but I'm not there yet.
Thanks for allowing me to share and for sharing files with me, it has helped a great deal in reaching my goals.
John
-
- 4 Star Elite Contributing Member
- Posts: 801
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Elite Member Contest - Surprise Giveaway
We have a Samson 5x10 table and a Hypertherm 65 with both torches.
And I want to say THANK YOU to the administrator and anyone associated with making this site as great as it is. I'm always amazed at the talented folks that offer their skills and time and see the things that are designed and built. I really do appreciate what this site offers.
Allen
And I want to say THANK YOU to the administrator and anyone associated with making this site as great as it is. I'm always amazed at the talented folks that offer their skills and time and see the things that are designed and built. I really do appreciate what this site offers.
Allen
-
- 2.5 Star Elite Contributing Member
- Posts: 166
- Joined: Thu Jun 16, 2011 9:19 am
- Location: Marshfield, MA.
- Contact:
Re: Elite Member Contest - Surprise Giveaway
I don't have a plasma table, I have a Omax 80X Waterjet and a Cam 5 model 5136 150W laser.
I have gained a tremendous amount of info, insight and files from being a member of this community and wish to express my gratitude for all the contributing members . Thank You all!
I have gained a tremendous amount of info, insight and files from being a member of this community and wish to express my gratitude for all the contributing members . Thank You all!
Omax 80X Waterjet 6 x 12 with Tilt-A-Jet
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
-
- 3.5 Star Elite Contributing Member
- Posts: 520
- Joined: Fri Nov 14, 2008 10:20 am
Re: Elite Member Contest - Surprise Giveaway
Started with PlasmaCam 4x4 and now have Samson 5x10 table running DesignEdge with Hypertherm Powermax 1000 plasma. Not sure how many years I have been on but the value of this site has been immeasurable. Many thanks to the Administrator and all who contribute and keep this site running.
Danny
Danny
-
- 3 Star Elite Contributing Member
- Posts: 319
- Joined: Thu Mar 31, 2016 2:51 pm
Re: Elite Member Contest - Surprise Giveaway
I Purchased a new 2014 Star-lab 4x4 table from Matt at Bulltear industries in Minnesota. I'm using Linux, Command CNC, Bobcad, and Sheetcam for software. The cutter is a Hyper-therm Powermax85 with a machine torch. I also have a SuperZx Z-axis assemble with Magnetic breakaway from CandCNC. I have crashed this table too times to count, all of my own doing, inexperience, and learning curve.The table has taken all the punishment I have given it and it still cuts flawlessly. So many thanks to Matt at Bulltear, all the people at CandCNC and all administrators and members at plasma spider who have taken the time to help me out and share their drawings and projects. I had absolutely no knowledge of any CNC machines or Cad software before I purchased this table. I still find it amazing that I can take an Idea, draw it up on a computer screen and a few minutes later I can be holding that Idea in my hand. Thank you "ALL" for making this possible. I could not have got this far with out you.
Gary
Gary
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: Elite Member Contest - Surprise Giveaway
I have a Thermodynamic 60 on a Plasmaroute table. There tech support sucks though!
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 2 Star Member
- Posts: 51
- Joined: Tue Feb 14, 2017 10:13 am
Re: Elite Member Contest - Surprise Giveaway
I don't own my own plasma cutter, but I use a Hypertherm 400XD machine on a Koike Aronson 22'x6' Plate Pro Extreme water table at work. Its a pretty awesome machine!
I would also like the echo the great value this forum has to this profession. The plasma cutter support, reviews on tables, and of course the files available are well worth the $20/year. I've been inspired several times by others on this forum, so keep up the good work!
-Calvin Carlson
I would also like the echo the great value this forum has to this profession. The plasma cutter support, reviews on tables, and of course the files available are well worth the $20/year. I've been inspired several times by others on this forum, so keep up the good work!
-Calvin Carlson
- runninwild400
- 2.5 Star Elite Contributing Member
- Posts: 148
- Joined: Wed Oct 15, 2008 5:24 pm
- Location: Ontario Canada
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 458
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: Elite Member Contest - Surprise Giveaway
got a hypertherm 45 mounted to what started of as a go torch now has a sampson gantry and plasmacam rails on a home built frame to give me a 5x10 table
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: Elite Member Contest - Surprise Giveaway
I've got a Hypertherm 45 with both torches running on a CandCNC system on a home built table with a Precision Plasma gantry.
Steve
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 813
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Thanks for all your hard work and for giving us a place to talk tables. And thanks for offering this giveaway too!
I use a TD Cutmaster 85 on an old Practical CNC table.
I use a TD Cutmaster 85 on an old Practical CNC table.
I think I'm the oldest 10 year old boy on the forum...
-
- 2 Star Elite Contributing Member
- Posts: 92
- Joined: Wed Aug 19, 2009 8:30 pm
Re: Elite Member Contest - Surprise Giveaway
it's been a minute but I am still here!
Running a hypertherm 1650 with a duramax torch upgrade
Running a hypertherm 1650 with a duramax torch upgrade
-
- 2.5 Star Member
- Posts: 105
- Joined: Tue Feb 08, 2011 11:02 am
- Location: Haslet, TX
Re: Elite Member Contest - Surprise Giveaway
Plasmaroute CNC 4 x4 water table with a TD 40.
Thanks for all of the help that you have given me over the years!!
Thanks for all of the help that you have given me over the years!!
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Elite Member Contest - Surprise Giveaway
Thanks for all you do to keep this site up and running.
Plasmacam DHC with a Lincoln Pro Cut 55
Plasmacam DHC with a Lincoln Pro Cut 55
- plasmajoe
- 3.5 Star Elite Contributing Member
- Posts: 676
- Joined: Thu Jul 30, 2009 8:19 pm
Re: Elite Member Contest - Surprise Giveaway
Awesome!
Koike Aronson Plate Pro
85 Hypertherm Powermax
Koike Aronson Plate Pro
85 Hypertherm Powermax