Elite Member Contest - WINNER
-
- 3 Star Member
- Posts: 273
- Joined: Sat Oct 06, 2012 7:16 pm
Re: Elite Member Contest - Surprise Giveaway
5x10 Torchmate table, now updated with Flashcut controls and a Hypertherm 1250. Thank you PlasmaSpider for all you do for us. This site is invaluable!
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Elite Member Contest - Surprise Giveaway
I use a Hypertherm 1250 with Duramax torch converted to Mini Torch on my Home Built 4x8 machine. Thank you so much for the Giveaway!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Elite Member Contest - Surprise Giveaway
Hobart Airforce 375 and Plasma Cam 4 x 4.
Dave Hanks
Dave Hanks
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: Elite Member Contest - Surprise Giveaway
I run a Hypertherm 600
Bought it new in 05 and still running great
Bought it new in 05 and still running great
-
- 2.5 Star Member
- Posts: 140
- Joined: Mon Jan 25, 2016 8:35 pm
Re: Elite Member Contest - Surprise Giveaway
Thanks for all your hard work ADMIN I know this bunch can be hard to handle at times.
Hypertherm PM 85 w/ machine torch
Hypertherm PM 85 w/ machine torch
-
- 4 Star Member
- Posts: 1008
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 45 with machine torch also 2 hypertherm 600s
thanks,
Jim
thanks,
Jim
-
- 2 Star Elite Contributing Member
- Posts: 84
- Joined: Wed Sep 21, 2016 11:31 am
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: Elite Member Contest - Surprise Giveaway
We have a Hypertherm 65 on a 4x8 table
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: Elite Member Contest - Surprise Giveaway
Hyp 65 duramax's
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
-
- 3.5 Star Elite Contributing Member
- Posts: 689
- Joined: Fri Aug 15, 2008 6:22 pm
- Location: Tenino,WA
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 1250 w/ both torches. Self built table.
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Re: Elite Member Contest - Surprise Giveaway
Hypertherm Powermax65
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
-
- 4 Star Elite Contributing Member
- Posts: 1004
- Joined: Thu Nov 21, 2013 5:32 pm
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 45 on a plasmacam 4x4 table
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 85 on homemade 3x4 table C&CNC electronics
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 3 Star Elite Contributing Member
- Posts: 409
- Joined: Tue Jan 05, 2010 7:00 am
Re: Elite Member Contest - Surprise Giveaway
Hi all, hope you are all having the best of success out there. I have a Hypertherm Powermax 30 and run it on a 4 x 4 Plasma Cam table. Good luck to you all!
- SCHIDTHEAD
- 3 Star Member
- Posts: 275
- Joined: Fri Jan 08, 2010 12:28 am
- Location: Under a Hood
Re: Elite Member Contest - Surprise Giveaway
Hands down one of my favorite sites
Hypertherm 1100
Powermax 45 xp
Hypertherm 1100
Powermax 45 xp
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
-
- 1/2 Star Member
- Posts: 6
- Joined: Mon Nov 13, 2017 8:59 am
Re: Elite Member Contest - Surprise Giveaway
Miller Xtreme 625. Got it because it was cnc ready, in short...it is not. They charge $250 for a faceplate and it was just more practical to personally modify it. Im not pleased with its results but itll do for what niche I need it to do. I dont advise it for heavy use.
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 45 on a Torchmate
-
- 5 Star Elite Contributing Member
- Posts: 2636
- Joined: Thu Jul 24, 2008 11:15 am
Re: Elite Member Contest - Surprise Giveaway
Pmax 65 with machine torch. Thanks for the contest and all your efforts!
-
- 2.5 Star Member
- Posts: 163
- Joined: Tue Apr 19, 2016 10:29 pm
- Location: In the way.
Re: Elite Member Contest - Surprise Giveaway
I have a Miller 375 Cutmate. If it would only quit then I could get a machine with a separate machine torch! A bit more power would be nice on occasion as well. My table is a home made machine that I really like. I had to do a bit of rewiring in the Miller.
David
David
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Elite Member Contest - Surprise Giveaway
Good work on the login problems, I was ok on the computer but had to keep logging in on the phone, been good for a few days now thanks.
I'm using a powermax 45 with the duramax torch.
I'm using a powermax 45 with the duramax torch.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 1 Star Member
- Posts: 13
- Joined: Mon Aug 15, 2016 11:45 am
Re: Elite Member Contest - Surprise Giveaway
Thanks!
Hypertherm 65 with Duramax HRT
Hypertherm 65 with Duramax HRT
- Unvevo
- 2 Star Elite Contributing Member
- Posts: 88
- Joined: Wed Jun 29, 2016 4:42 pm
Re: Elite Member Contest - Surprise Giveaway
Thanks for all your work keeping this place going! Im running a hypertherm 45xp on a cobbled together 4x4
- Bor21
- 2 Star Member
- Posts: 75
- Joined: Tue May 30, 2017 7:17 am
- Location: Randolph, NY
Re: Elite Member Contest - Surprise Giveaway
Powermax 85
Bladerunner CandCnC
DIY table
Bladerunner CandCnC
DIY table
Powermax 85
Bladerunner CandCnC
SheetCam, Mach3,
Inkscape, Gimp
Lots of home BREW
Bladerunner CandCnC
SheetCam, Mach3,
Inkscape, Gimp
Lots of home BREW
-
- 1 Star Member
- Posts: 21
- Joined: Sat Jun 01, 2013 1:08 am
- Location: Tekamah, Nebraska
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Please include me
-
- 3 Star Member
- Posts: 345
- Joined: Mon Feb 23, 2015 5:23 pm
- Location: Austin, TX
Re: Elite Member Contest - Surprise Giveaway
Hyperthermia 65 /w Machine Torch. Star labs table.