First Share: Clint Eastwood
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
First Share: Clint Eastwood
This is my first time being able to share a file on plasma spider. This has been an awesome site to go to for help! Thank you to everyone who helped me get my table up and running, and to those who share file after file. My dad is a really big Clint Eastwood fan, so I spent quite a few hours trying to figure out how to convert a photo from his movie Josey Wales into a cutable file. Anyway, I hope some of you can use it. I only had 8" x 24" of scrap left so I made it pretty small. It would turn out alot better if it were about 12 or 14 inches tall. It looks SO much better in person hanging on my dads wall in his garage than it does in the pictures.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by TrinityFabworks on Tue Sep 18, 2018 1:29 pm, edited 1 time in total.
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: First Share: Clint Eastwood
I'm trying to upload an image of what it looks like cut, painted, and hung on the wall. It says that the file is too large. Any way around this or to shrink the file size?
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: First Share: Clint Eastwood
You can put it into a .ZIP file and send that, WIN RAR is a free program that you can use to zip & un-zip files you can also bundle files into a single zip file to send.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 5 Star Elite Contributing Member
- Posts: 2621
- Joined: Thu Jul 24, 2008 11:15 am
Re: First Share: Clint Eastwood
Extremely impressive design. I have always found faces to be very difficult to do but you knocked this one out! Thanks for sharing!
-
- 2.5 Star Member
- Posts: 171
- Joined: Fri Nov 18, 2016 5:13 pm
Re: First Share: Clint Eastwood
Nicely done!TrinityFabworks wrote:I'm trying to upload an image of what it looks like cut, painted, and hung on the wall. It says that the file is too large. Any way around this or to shrink the file size?
To post photos on here I downloaded an app on my phone called 'Photo Compress.' It was free and allows me to shrink photos that were originally 4+ MB down to less than 1 MB for posting here.
Tim Eggleston
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: First Share: Clint Eastwood
Load the picture into PAINT, then in the file tab there is a "resize". Click on that and you can change the file size by a percentage or by pixels, be sure that you do a "save as" if you still want the original file.TrinityFabworks wrote:I'm trying to upload an image of what it looks like cut, painted, and hung on the wall. It says that the file is too large. Any way around this or to shrink the file size?
Larry
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: First Share: Clint Eastwood
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: First Share: Clint Eastwood
Here it is cut. It is a lot better looking in person. I will say, it is best to hang high up on the wall. When I first picked it up off the table I was very disappointed until I put it in front of a backer and stepped back.
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: First Share: Clint Eastwood
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Peechy
- 3 Star Elite Contributing Member
- Posts: 338
- Joined: Tue Nov 11, 2014 9:12 pm
- Contact:
Re: First Share: Clint Eastwood
Awesome Great work ! keep posting thanks for the share
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 458
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: First Share: Clint Eastwood
looks awesome
-
- 1 Star Member
- Posts: 16
- Joined: Wed Mar 23, 2016 8:00 pm
Re: First Share: Clint Eastwood
Looks Great . is there a dxf file of it that someone can share ? Thanks.
-
- 3 Star Member
- Posts: 273
- Joined: Sat Oct 06, 2012 7:16 pm
Re: First Share: Clint Eastwood
You can convert the svg to dxf for free in just a few clicks using cloudconvert.com.27ford wrote:Looks Great . is there a dxf file of it that someone can share ? Thanks.
-
- 1 Star Member
- Posts: 16
- Joined: Wed Mar 23, 2016 8:00 pm
Re: First Share: Clint Eastwood
Thanks for the help Redneck. I will give that a try.
-
- 1/2 Star Member
- Posts: 3
- Joined: Mon Apr 02, 2018 8:44 pm
Re: First Share: Clint Eastwood
thanks it cut out great