couple rifles

[kel fab creations]

Here's an AR-15 and mosin nagant. I designed the detail on these files to be etched with a plate marker attachment. Feel free to edit if you don't have a plate marker. I used fine cut consumables and cut out of 1/8".

[kel fab creations]

Why won't it post my dxf's when I upload them?

[DXF]

Why won't it post my dxf's when I upload them?

If they are over 1MB you need to upload them in a zip file. They look cool! Thanks

[kel fab creations]

thanks for the zip tip. this is my first dxf contribution. the problem was trying to upload with my phone.

[Scratch]

Nice files! What's the length of them? Do you have any of the Mosin Nagant with thecorrect stock on it?

[kel fab creations]

the nagant is about 12'' long and the AR is 16.125''. i scaled the nagant up to 15.5" right before i cut it but it's on my other computer. these are my first 2 trys at manual tracing this much detail and i used corel draw for the first time too so sorry, dont have one with the other stock. here's a pic of the gun with the old stock though.