Mach 3 settings
-
- 1 Star Member
- Posts: 17
- Joined: Thu Apr 12, 2012 10:55 pm
Re: Mach 3 settings
That worked now my torch won't fire
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Mach 3 settings
YOu need to setup the pin for output #1 most are pin 9 (from robert's info you may need to use pin 14 not 9) when you set it up you can hit the F5 key when on the program page if correct it will fire the torch but hit it again to turn off fast. The first page below sets it so M3 will fire the torch from G-code and m5 for off.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1 Star Member
- Posts: 17
- Joined: Thu Apr 12, 2012 10:55 pm
Re: Mach 3 settings
Thank you guys for everything finally got to cut something today!
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1952
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Mach 3 settings
Beautiful. Happy to be able to help.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Mach 3 settings
Happy to help, bet you learned a few things along the way, funny how problems do that
And saved some bullets I'm about to pull out my 45 and fix it my way!!
Thanks for the reply
And saved some bullets I'm about to pull out my 45 and fix it my way!!
Thanks for the reply
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT