TM2- Howdo you incease the jog speed

Torchmate Hardware discussion forum
Post Reply
inspectweld
2 Star Member
2 Star Member
Posts: 60
Joined: Tue Dec 26, 2017 10:11 pm

TM2- Howdo you incease the jog speed

Post by inspectweld »

I have the TM2 table and software and I would like to know how to increase the jog speed, thanks
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: TM2- Howdo you incease the jog speed

Post by weldguy »

I'm not a TM user but I suspect it will be in your post processor under rapid speed or similar term. Shouldn't be tough to locate and change. Good luck
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1213
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: TM2- Howdo you incease the jog speed

Post by ben de lappe »

Prior TM 3 finished machine user with TM 4 driver software. No knowledge whatsoever of TM 2 but as the software is proprietary possibly in your driver software settings, see pic. Probably not as obvious as my Jog Speed button, total shot in the dark till someone with 2 experience chimes in. May also help to list your AVHC if applicable as well as driver for motors. Mine was model 401A signal generator.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

modernpioneer
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Mon Mar 11, 2019 8:08 pm

Re: TM2- Howdo you incease the jog speed

Post by modernpioneer »

Right here

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “Torchmate Forum”