Help With a File

Post by **Dawgonhawg** » Fri Jun 24, 2011 12:36 am

This is my first piece to design. I am not doing something right and would appericate your help.
Thanks, Dawg

Post by **Chopper John** » Fri Jun 24, 2011 2:40 am

You just need to incase your lettering somehow, it is sitting in the silhouette cut out area. Hope that makes sense, because I suck at explaining things. Here is a picture for reference.

Post by **Bigrhamr** » Fri Jun 24, 2011 1:04 pm

One thing that helps me when doing design and layout is to do a solid fill on it so you can visualize what will be solid and what is a hole, what's attached or not, find the "holes inside holes" and so on.
If your drawing software doesn't do fills you can paste the drawing into MS Paint and do it there.

Post by **Chopper John** » Fri Jun 24, 2011 2:50 pm

The file.

Post by **DXF** » Fri Jun 24, 2011 4:44 pm

Real nice job!

Dave Hanks

Post by **Dawgonhawg** » Fri Jun 24, 2011 7:41 pm

Chopper John, thank you. Hopefully soon I will have all this art stuff figured out and can start adding to the forem.
Thanks again, Dawg.

WSS · Post by **WSS** » Sat Jun 25, 2011 2:08 am

Dawg,
You will like files from Chopper John. He has talent.

WSS

Post by **Dawgonhawg** » Sat Jun 25, 2011 2:28 am

I showed this off today and my customer LOVED IT!!! THANKS AGAIN COPPER JOE.
DAWG

Post by **Chopper John** » Sat Jun 25, 2011 1:29 pm

Your very welcome Dawg, glad they liked it! Thanks for the compliments WSS and Dave.

Help With a File

Help With a File

Re: Help With a File

Re: Help With a File

Re: Help With a File

Re: Help With a File

Re: Help With a File

Re: Help With a File

Re: Help With a File

Re: Help With a File