Hello,
Sheetcam updated to 7.1.8. Now when I use Run Post Processor the file is saved as .CNC file, instead of .TAP file. My Masso unit does not see .CNC files. Was working fine before update. Help please.
Run Post Processor from .TAP files to CNC files
-
- 2 Star Member
- Posts: 73
- Joined: Wed Oct 05, 2016 8:52 am
- jmersereau
- 2.5 Star Elite Contributing Member
- Posts: 214
- Joined: Mon Feb 22, 2021 10:04 pm
- Location: Ferrara, Italy
Re: Run Post Processor from .TAP files to CNC files
I also updated to 7.1.8 but still export .TAP files. Is it possible you changed something else at the same time?
Jim
Jim
PrimeWeld CUT60
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
-
- 2 Star Member
- Posts: 73
- Joined: Wed Oct 05, 2016 8:52 am
Re: Run Post Processor from .TAP files to CNC files
Nothing that I know of.jmersereau wrote: ↑Mon Mar 29, 2021 8:13 pm I also updated to 7.1.8 but still export .TAP files. Is it possible you changed something else at the same time?
Jim
- jmersereau
- 2.5 Star Elite Contributing Member
- Posts: 214
- Joined: Mon Feb 22, 2021 10:04 pm
- Location: Ferrara, Italy
Re: Run Post Processor from .TAP files to CNC files
Check in SheetCam under Options, Machine, Post Processor to see if your settings were reset on update
PrimeWeld CUT60
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Mar 22, 2016 10:30 am
Re: Run Post Processor from .TAP files to CNC files
What post processor are you using? It could be that your post processor was updated at the same time. Some posts set the file extansion to a fixed value.
-
- 2 Star Member
- Posts: 73
- Joined: Wed Oct 05, 2016 8:52 am
Re: Run Post Processor from .TAP files to CNC files
Thanks guys. It was my Post Processor. When I updated, it changed processors.
-
- 1/2 Star Member
- Posts: 1
- Joined: Wed Apr 21, 2021 9:59 am
Re: Run Post Processor from .TAP files to CNC files
Good afternoon i am having the same problem i don't know what post processor to use
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7821
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Run Post Processor from .TAP files to CNC files
If you give info on your table/electronics a suggestion can be made as to the post processor you should use. Les has supplied many post processors with SheetCam because there are many differences in table designs and options that tables can have.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT