2x72 belt grinder for knife making
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 2x72 belt grinder for knife making
Simko posted his web page up above where they are posted and on page 1 here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1/2 Star Member
- Posts: 1
- Joined: Sat Oct 16, 2021 7:59 pm
Re: 2x72 belt grinder for knife making
VERY nice! Amazing in fact!
I was going to buy a 2x72, but they are quite expensive, and have been trying to make do with my crappy 1x30... but it's finally given up on me!
I've been looking at these instructions - https://knife-grinders.co.uk/2x72-belt- ... r-at-home/ but yours seem really good! So, think I'll be following your info!
Cheers!
I was going to buy a 2x72, but they are quite expensive, and have been trying to make do with my crappy 1x30... but it's finally given up on me!
I've been looking at these instructions - https://knife-grinders.co.uk/2x72-belt- ... r-at-home/ but yours seem really good! So, think I'll be following your info!
Cheers!
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 2x72 belt grinder for knife making
I have built 3 of the 2' X 72" belt grinders but I used the Jeremy Schmidt plans and would highly recommend them.
here is my post about the build. Sold 2 of them to Knife guys, they are happy
https://weldingweb.com/vbb/threads/7099 ... lt+grinder
here is my post about the build. Sold 2 of them to Knife guys, they are happy
https://weldingweb.com/vbb/threads/7099 ... lt+grinder
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 8763
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: 2x72 belt grinder for knife making
Jeremy Schmidt has some great Youtube videos. I haven't watched him in a while, but I did see the one where he built the belt sander (he called it a "grinder"). I had never heard of an Arduino or G-Shield until I saw his video on the small cnc router he built. I learned a lot from that one, and ended up building something similar using the Arduino with GRBL. This is the small machine I built several years ago in photo.
David
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 2x72 belt grinder for knife making
I finished the belt grinder, used power coating for the covering on the grinder. Fun project and a very handy tool to have in the shop. I sold the other 2 to knife guys for their shops.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- SegoMan DeSigns
- 4 Star Member
- Posts: 861
- Joined: Sat Jan 06, 2018 4:45 pm
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 2x72 belt grinder for knife making
Yes sir that is big, great for doing you finger nails I watched that video sometime back, I don't think I could afford the belts, or the steel. With the machines he has he don't play around.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 8763
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: 2x72 belt grinder for knife making
Tom - that's a really good looking machine. Nice build!!acourtjester wrote: ↑Sat Oct 30, 2021 12:45 pm I finished the belt grinder, used power coating for the covering on the grinder. Fun project and a very handy tool to have in the shop. I sold the other 2 to knife guys for their shops.
DSCN4959.JPG
DSCN4961.JPG
DSCN4966.JPG
DSCN4964.JPG
DSCN4963.JPG
David
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 2x72 belt grinder for knife making
Thanks David with all the equipment in your shop you could pop one out in no time.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 2x72 belt grinder for knife making
As side note I needed to have a way to remove the larger parts from my powder coating oven (its horizontal loaded) so I welded up an attachment for a floor jack. they are 400 degrees coming out of the oven. To much fun in the shop
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- SegoMan DeSigns
- 4 Star Member
- Posts: 861
- Joined: Sat Jan 06, 2018 4:45 pm
Re: 2x72 belt grinder for knife making
Fireball tools is quite the entrepreneur, he started out in a small shop with a few tools and has grown into a large business. Like others on this site he is paying it forward showing others how to build things. It's scary how many schools no longer have any type of building trades or wood / mechanical shops. It's almost like that does not exist why do we need to teach that?acourtjester wrote: ↑Sat Oct 30, 2021 4:03 pm Yes sir that is big, great for doing you finger nails I watched that video sometime back, I don't think I could afford the belts, or the steel. With the machines he has he don't play around.
-
- 6 Star Elite Contributing Member
- Posts: 8763
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: 2x72 belt grinder for knife making
Tom - that would most certainly be a fun project, and I do like the capability of rotating it on its side. I remember seeing something similar a few years ago advertised on the Trick Tools site, and it was "ultra expensive".acourtjester wrote: ↑Sat Oct 30, 2021 6:48 pm Thanks David with all the equipment in your shop you could pop one out in no time.
https://www.trick-tools.com/Hardcore-Ma ... chine-9450
I've already got a small collection of belt sanders that I use quite a bit. In particular I like the Grizzly knife sanders - I bought several of them back around 2017 on sale. So I've pretty much got most of my sanding/grinding needs covered.
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 2x72 belt grinder for knife making
yes sir you do have that covered nice looking coupe there too
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Nov 30, 2023 10:44 am
Re: 2x72 belt grinder for knife making
I'm new to this form. I like the design of the Sayber OSG belt grinder. Hope there is somebody that can help me? Is there anybody that can send me the dxf files please?