-
-
Weekly Free DXF Design
-
Download DXF/SVG
Hi from bc, Canada.
-
souslab
- 1/2 Star Member
- Posts: 4
- Joined: Thu May 14, 2020 10:12 pm
Hi from bc, Canada.
Hi, I've been a supporting member for a couple years and thought I should say hello. I have a 4x8 fastcut icon elite table and a hypertherm 45xp. I have downloaded a drawing or two but mostly use the site for information. Lots of great ideas on here.
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11375
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Hi from bc, Canada.
Welcome aboard! I saw you recently cut part and it looks great! Keep it up. That 45xp is a great little cutter, and the FineCuts work great on the thinner stuff. I use mine on anything 10 ga. and thinner. Send us some pictures of your setup so we can see what you are up to. What are you using for creating your drawings (cad) and creating your cut paths (cam)? Many here use Inkscape and Sheetcam, but there are so many different options out there.
David
David
