Hello

Post by **rubberduck** » Thu Mar 10, 2022 11:12 pm

Hello from Ohio, just purchased a used star lab 5x10 trying to get it figured out and setup. Seems to be a lot of good information here from very knowledgeable people.

Post by **adbuch** » Fri Mar 11, 2022 12:36 am

Welcome aboard! It sounds like you've got a nice table there - what kind of cutter did it come with? There is plenty of information to be had here on software, hardware, as well as many cut files shared by fellow members. Let us know if you have specific questions, and be sure to use the search function to try to find specific topics of interest.
David

Post by **rubberduck** » Fri Mar 11, 2022 12:47 pm

It came bare no cutter included but I outfitted it with a hypertherm powermax 85.

Post by **adbuch** » Fri Mar 11, 2022 2:57 pm

rubberduck wrote: Fri Mar 11, 2022 12:47 pm It came bare no cutter included but I outfitted it with a hypertherm powermax 85.

Post by **HypHyDef** » Fri Mar 25, 2022 10:03 am

Welcome!
Let me know if you need any information on your Powermax85, I would be happy to help in any way I can.

Hello

Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello