Looking for aftermarket Coupling for Screw to Motor for my lifter
-
- 1.5 Star Member
- Posts: 42
- Joined: Sat May 04, 2019 9:30 pm
- Contact:
Looking for aftermarket Coupling for Screw to Motor for my lifter
Looking for a after market or Original MFG part number/purchase to the Torchmate Gen 1-Gen 2 Smart motor lifter statation ball screw coupling. Im sure it's on McMasters site but not sure which one im looking for
-
- 6 Star Elite Contributing Member
- Posts: 8714
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Looking for aftermarket Coupling for Screw to Motor for my lifter
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 42
- Joined: Sat May 04, 2019 9:30 pm
- Contact:
Re: Looking for aftermarket Coupling for Screw to Motor for my lifter
no, it looks like this but way over prices from lincoln https://www.torchmatestore.com/Screw-Co ... _3195.html
-
- 4 Star Elite Contributing Member
- Posts: 1985
- Joined: Fri Apr 17, 2009 11:48 am
Re: Looking for aftermarket Coupling for Screw to Motor for my lifter
If that's all you need I suspect if the ID is correct for your shafts and the OD is not too large you could use almost any shaft coupling.
-
- 6 Star Elite Contributing Member
- Posts: 8714
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Looking for aftermarket Coupling for Screw to Motor for my lifter
What size is your shaft that fits into the coupling? Shaft outside diameter? I have several sources for these at very inexpensive prices.tulsajosh wrote: ↑Thu Mar 24, 2022 11:57 am no, it looks like this but way over prices from lincoln https://www.torchmatestore.com/Screw-Co ... _3195.html
David
-
- 1.5 Star Member
- Posts: 42
- Joined: Sat May 04, 2019 9:30 pm
- Contact:
Re: Looking for aftermarket Coupling for Screw to Motor for my lifter
I think i got it solved, Just ordered one with smaller diameter and drilled out to the size needed but there was 2 different odd ball sizes and seems to be working just fine now. Thank you everyone
-
- 4 Star Elite Contributing Member
- Posts: 1985
- Joined: Fri Apr 17, 2009 11:48 am