fire pit spark sheild

[plasmajoe]

I seen lots of firepits on this site and a few stands, but I do not recall seeing any spark sheilds as of yet. So I took it upon my self to share one with you all. Now this one was a custom size one to fit over an existing stone fire pit, and the client wanted it with doors and bar hooks for it. I disided to share this one because I find it will get your imagination going, so much potential for modifications on the design. I put the ports along the outside because the little girl wanted to have access to the fire for her marshmallow and spider weiners, . It turned out great and been working for them for years now, so I know the design works well.Have fun with it and it is converted to polylines for you all and joined, hopefully I did it right. Any questions on fabricating this please feel free to ask me.

Plasma Joe

[dreamer]

Thank's Joe this will come in handy.

[Russ K]

Thanks for your post, Joe. The drawing imports into PlasmaCam Ok but there are no letters. Any Ideas? Is the font you are using not a True Type font? Thanks Russ K.

[plasmajoe]

Thanks for your post, Joe. The drawing imports into PlasmaCam Ok but there are no letters. Any Ideas? Is the font you are using not a True Type font? Thanks Russ K.

Hi Russ,

I use the standard text on AutoCad wich is Arial a True Type font, I run into that issue also when I use my MicroStation software also, I do get most of the lettering but mostly I get ? marks instead of dimensions. I have no answers to solve that problem. But you have the JPEG to reference off.

Plasma Joe