New Drum Sander
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
New Drum Sander
I went up to Missouri to help a friend with his table. Then I swung over to Clever, MO to visit with some friends. Well, Springfield MO isn't far away, and I cannot get so close to Springfield without dropping into Grizzly Tools to see if there is anything I cannot live without.
So there it was, in the "Scratch-n-Dent" department with the most minimal dents in the metal cabinet ... but enough of a dent to take $800.00 off of the price! I picked this baby up for $3,500.00, and bought four additional sanding belts of 60, 100, 120, and 220 grit, for variety.
I just unloaded it from my truck tonight. I am anxious to see how this behaves with 14 gauge steel.
Joe
http://www.grizzly.com/products/shop-fo ... nder/w1678
So there it was, in the "Scratch-n-Dent" department with the most minimal dents in the metal cabinet ... but enough of a dent to take $800.00 off of the price! I picked this baby up for $3,500.00, and bought four additional sanding belts of 60, 100, 120, and 220 grit, for variety.
I just unloaded it from my truck tonight. I am anxious to see how this behaves with 14 gauge steel.
Joe
http://www.grizzly.com/products/shop-fo ... nder/w1678
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 4 Star Elite Contributing Member
- Posts: 800
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: New Drum Sander
DANG, JOE. You're going to have to build another building if you keep getting more toys!
Allen
Allen
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
I have two shops, a metal shop and a wood shop. The wood shop is affectionately known as the "FrankenBarn." It began as an idea for a 600 sq. ft. wood shop on a concrete pad. That was the concept. A simple 20'x30' single level building. Well, when we began to work on the project we added this ... and that ... and that too ... and as long as we did that, it only made sense to add this as well ...
![Wink :wink:](./images/smilies/icon_e_wink.gif)
It turned into a 6,096 sq. ft. four-level building with a full walking attic and a basement.
![Wow :Wow](./images/smilies/icon_new_wow.gif)
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
The 32'x48' basement has 9' walls, 10" thick. At the surface, another 12'x32' pad was poured, to make the ground level 32'x60'
I did not intend for the second floor guest bedrooms. But he showed up with these LONG 6"x6" poles, and said he would cut them down. I said, "Oh, Hell no! Let's just add another floor!" Then the attic was an afterthought, for storage space.
180 sheets of 3/4" exterior plywood for the floors. The ground level has a double layer, 1-1/2" thick.
At today's wood prices, I would not be able to AFFORD to build this thing.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
Already planned ...
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 4 Star Elite Contributing Member
- Posts: 800
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: New Drum Sander
Hmmm, might take a little longer but you're still gonna run out of room.
Allen
Allen
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
Sadly, the only thing I have run out of is motivation. I am trying to get excited about this stuff again. It isn't that I cannot do it. it is that I just don't care much about anything any longer. People tell me to "just find something that makes you happy and do that..."
I am watching this country float uncontrolled down the center of a deep and wide river toward a high waterfall just ahead. We are picking up speed, and we will soon teeter over the edge and crash onto the rocks far below. Despite my dire warnings about what lies ahead, and my efforts to get people to grab paddles to help navigate America to the shore before we reach the falls, it seems that everyone is hopelessly focused on the pretty flowers along the river banks.
Joe
.
I am watching this country float uncontrolled down the center of a deep and wide river toward a high waterfall just ahead. We are picking up speed, and we will soon teeter over the edge and crash onto the rocks far below. Despite my dire warnings about what lies ahead, and my efforts to get people to grab paddles to help navigate America to the shore before we reach the falls, it seems that everyone is hopelessly focused on the pretty flowers along the river banks.
Joe
.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 4 Star Elite Contributing Member
- Posts: 800
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: New Drum Sander
You sure hit the nail on the head there! I've always tried to keep the attitude that I'm kinda like a baby goose.....every day is a new experience, but it's gettin tougher. I guess I'm just gettin too old.
Allen
Allen
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
I have scheduled two small motorcycle rallies in the coming weeks. I have joined the SCRC (Southern Cruisers Riding Club) so I can get out on my Goldwing once in a while and enjoy life. There is a gathering in Maysville, KY this coming week, and a bigger rally in Johnson City, TN later in June. I have signed up for both of them. Sadly, I am going alone. What can I say? Sandra Bullock turned me down, and Cameron Diaz won't return my calls
Joe
.
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Sad :Sad](./images/smilies/icon_new_sad.gif)
Joe
.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
Maybe I will plug in the sander in July ???
Joe
.
Joe
.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 6 Star Elite Contributing Member
- Posts: 8668
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: New Drum Sander
Pretty sure this one is intended for wood only. There have been some discussions on some of the forums about attempts to use the wood sanders for metal by reversing the rotation of the drum or belt (I don't remember which). I will be anxious to find out your results attempting to use this one for metal, in particular dross removal. Good luck.Joe Jones wrote: ↑Thu Jun 02, 2022 10:32 pm I went up to Missouri to help a friend with his table. Then I swung over to Clever, MO to visit with some friends. Well, Springfield MO isn't far away, and I cannot get so close to Springfield without dropping into Grizzly Tools to see if there is anything I cannot live without.
So there it was, in the "Scratch-n-Dent" department with the most minimal dents in the metal cabinet ... but enough of a dent to take $800.00 off of the price! I picked this baby up for $3,500.00, and bought four additional sanding belts of 60, 100, 120, and 220 grit, for variety.
I just unloaded it from my truck tonight. I am anxious to see how this behaves with 14 gauge steel.
Joe
http://www.grizzly.com/products/shop-fo ... nder/w1678
1678 SANDER.jpg
David
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
I have a wood shop and a metal shop. I hope it will work. I cannot imagine that the machine knows the difference between a wood surface and a metal surface. If the metal is run through and the paper just skims the top surface, I believe it will work fine. Time will tell!
Joe
.
Joe
.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- SegoMan DeSigns
- 4 Star Member
- Posts: 848
- Joined: Sat Jan 06, 2018 4:45 pm
Re: New Drum Sander
Stop daydreaming about those city ho's with 10 lbs of makeup and find yourself a "Redneck Woman" like Gretchen Wilson sings aboutJoe Jones wrote: ↑Mon Jun 06, 2022 11:20 am I have scheduled two small motorcycle rallies in the coming weeks. I have joined the SCRC (Southern Cruisers Riding Club) so I can get out on my Goldwing once in a while and enjoy life. There is a gathering in Maysville, KY this coming week, and a bigger rally in Johnson City, TN later in June. I have signed up for both of them. Sadly, I am going alone. What can I say? Sandra Bullock turned me down, and Cameron Diaz won't return my calls![]()
![]()
![]()
Joe
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
I just KNOW she is out there ... somewhere!
Joe
![Laughing :lol:](./images/smilies/icon_lol.gif)
Joe
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- cstroke
- 3 Star Elite Contributing Member
- Posts: 405
- Joined: Thu May 24, 2012 7:45 pm
Re: New Drum Sander
She is indeed out there. If you see her could you find out what she did with my kidney?
I did not enjoy waking up in that ice bath 1 star experience...
I did not enjoy waking up in that ice bath 1 star experience...
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
- 5 Star Elite Contributing Member
- Posts: 2607
- Joined: Thu Jul 24, 2008 11:15 am
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
Oh, yes! I MET HER! "Anna" ,,, at a campground on a motorcycle tour in 2012. Without going into great detail, I slept in my tent with my GLOCK at my side that night. I didn't want to wake up at 3:00 AM with her over me, stabbing me with a butcher knife yelling, "I! DON'T! TAKE! REJECTION! WELL!!!"
Joe
.
![Shocked :shock:](./images/smilies/icon_eek.gif)
Joe
.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 5 Star Elite Contributing Member
- Posts: 2607
- Joined: Thu Jul 24, 2008 11:15 am
Re: New Drum Sander
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Feb 26, 2021 10:01 pm
Re: New Drum Sander
Did you end up trying out that sander on dross removal?
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3118
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New Drum Sander
I have not even plugged it in to see it in action. Time ... Time ... Time ... I really do need a helper!
At the moment, the pressure is on me to produce the Halloween props they will need for the cemetery, about 20 large tombstones, and some breathing walls, and a few other nifty things.
Joe
At the moment, the pressure is on me to produce the Halloween props they will need for the cemetery, about 20 large tombstones, and some breathing walls, and a few other nifty things.
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!