Just wondering if anybody would have the settings for using the EasyScriber with Plasmacam 3.11 that they'd share.
Thanks.
Allen
Using EasyScriber with Pcam 3.11
-
- 4 Star Elite Contributing Member
- Posts: 801
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
Re: Using EasyScriber with Pcam 3.11
Hi Allen
See if the image below helps you out.
See if the image below helps you out.
-
- 4 Star Elite Contributing Member
- Posts: 801
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Using EasyScriber with Pcam 3.11
Thanks, I'll try it.
Allen
Allen
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1175
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Using EasyScriber with Pcam 3.11
All of those Design Edge settings are available in 3.11 even if they are not in the same places on the screen.
Let me know here if you have any trouble and i'll open 3.11 and take some screenshots specific for it.
Let me know here if you have any trouble and i'll open 3.11 and take some screenshots specific for it.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
-
- 4 Star Elite Contributing Member
- Posts: 801
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Using EasyScriber with Pcam 3.11
Wifey has Design Edge on the PC in the office but she WON'T put it on the one in the shop, and we don't wanna get into that. But we never could seem to get the settings right so she just gave up. But we've quit doing production work and now have the time to mess with it and I'd really like to see it dialed in. When the weather cools down a little, we're going to try it again. 99 degrees with 70% humidity is just too much for this old body.
Thanks.
Allen
Thanks.
Allen
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
Re: Using EasyScriber with Pcam 3.11
Thanks Robert, appreciate you coming up with these settings for us and continuing to help