Registered Trademarks

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
GWS.Arkansas
2.5 Star Member
2.5 Star Member
Posts: 115
Joined: Fri Jun 10, 2011 6:30 pm

Registered Trademarks

Post by GWS.Arkansas »

Ok i need to figure this out. I have heard alot of different stuff. If you trace an image off the internet that has a trademark and you change it a little bit . Can you still get in trouble for it and if so what can they do. I dont want to have any problems and I want to be legal with my work. So what do i do . Also how can you get permission to use it. I sure hope someone can help me with this. And again thanks to all of you for making this such a kick ass web site . It has been so helpful in the learning process of my machine. Thank You All.
plain ol Bill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 687
Joined: Fri Aug 15, 2008 6:22 pm
Location: Tenino,WA

Re: Registered Trademarks

Post by plain ol Bill »

I own a registered trademark. I and many other companies do not really care if you infringe on our trademark as long as credit is given. However - many companies will very aggresively pursue anyone infringing upon their trademark. So the best thing you can do is to ask before using!
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Post Reply

Return to “CNC Plasma Cutters General Forum”