fab-cut owner

[plasmalady]

in process buying Fab-cut cnc plasma table

[N2 Welding]

Tell us all about it.

[plasmalady]

havent got machine yet waiting to get shipped . its a used unit

[Jason@bc]

Is this Fab-cut in Canada? I believe Renee Barnes is their main guy to talk to, I'm just curious because I'm also on the hunt for another table. From what I've researched and heard they seem to have quite a good system.

[plasmalady]

Seems be a good bunch . I have spoken to Rene seems be good guy deal with. what type metal work r u into? I am new to this cnc plasma world just trying to add little extra to business.

[Jason@bc]

I'm into a little bit of everything, fixing and repairing, a little stainless work, my biggest gig is building screwpiles.

[adbuch]

What is a "screwpile"?
David

[plasmanewbie]

Welcome plasmalady! Hope you are able to get the machine and that it works out well.

I also wondered what a screwpile was David.

screwpile.PNG (38.17 KiB) Viewed 1200 times

screwpile.PNG (38.17 KiB) Viewed 1200 times

[Jason@bc]

What is a "screwpile"?
David

Here's what I meant with screwpiles.

[Jason@bc]

Welcome plasmalady! Hope you are able to get the machine and that it works out well.

I also wondered what a screwpile was David.


screwpile.PNG

Thanks plasmanewbie.

[plasmalady]

not much good for Newfoundland mostly rock

[plasmanewbie]

Wow, those are much larger than I had imagined. Very cool.

[adbuch]

Welcome plasmalady! Hope you are able to get the machine and that it works out well.

I also wondered what a screwpile was David.


screwpile.PNG

Thanks Plasmanewbie! I guess I was too lazy to let Google be my friend. But that explains it quite well.
David

[adbuch]

Here's what I meant with screwpiles.

Jason - thanks for those photos! Very impressive work. What sort of big machine is required to install these? And is this something you do as well, or are these for customers?
Thanks,

David

[Jason@bc]

Here's what I meant with screwpiles.

Jason - thanks for those photos! Very impressive work. What sort of big machine is required to install these? And is this something you do as well, or are these for customers?
Thanks,

David

We install these as well... we also build some for customers. here's a link that will explain the process better than I can, thanks for the compliment.

https://innovativepiling.ca/about/

[plasmalady]

what is used the most cold rolled steel or hot rolled steel in sheets for cnc plasma cutting

[N2 Welding]

what is used the most cold rolled steel or hot rolled steel in sheets for cnc plasma cutting

Good question: Cold rolled does not have the thin slag coating while hot rolled requires more prep is some situations prior to paint or staining etc where as cold rolled has been coated with oils so you get dirtier handling it and it will rust faster out in the elements where as Hot Rolled can sit in the rain and weather with less rust/surface deteriation. I believe cold rolled is more expensive. Think it mostly boils down to what kind of finish the end result required. Anything I am missing here guys?

[adbuch]

what is used the most cold rolled steel or hot rolled steel in sheets for cnc plasma cutting

I would say it's probably 50/50 or so. Many use hot rolled to save some money. My local supplier usually has them priced about the same, and sometimes cr is actually less expensive than hr. I suppose it just depends on your suppliers.
David

[lavoiemaxi]

i own fab cut table they are awsome after sale service is a1 table run great ive purchased it in 2022

[Jason@bc]

i own fab cut table they are awsome after sale service is a1 table run great ive purchased it in 2022

That is good to know, thanks for the info. I'm dealing on a used unit right now...