Mad Printer at it again
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Mad Printer at it again
For fun I wanted to develop a cardboard cutting Drag Knife, this is what I came up with. Files free for the asking.
Either a torch or flat bar type mount, torch mount shown.
Either a torch or flat bar type mount, torch mount shown.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 8677
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Mad Printer at it again
Nice work Tom! What is your depth of cut and cut speed in your video? That is a cool tool that I could adapt to my cnc router.
David
David
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Mad Printer at it again
Yes fairly easy the shaft the it rotates on is 8 MM (.314" just over 5/16") so if they have a 5/16" collet for the router for the shaft would fit into. Or I also have a 3-D printed shaft holder that can be attached to a flat bar for mounting to the router holder.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 8677
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Mad Printer at it again
What is your depth of cut and cut speed in your video?
Thanks,
David
Thanks,
David
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Mad Printer at it again
Sorry I forgot to answer that I use a router tool in SheetCam and cut depth is 0.050" per for the total depth of the cardboard and 35 IPM.
It should also have a soft material under the cardboard so the blade and penetrate and not break the blade tip. I used another layer of cardboard, I have seen others using cork sheets.
It should also have a soft material under the cardboard so the blade and penetrate and not break the blade tip. I used another layer of cardboard, I have seen others using cork sheets.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Mad Printer at it again
Additional images showing the other type mount for the drag knife.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 5 Star Elite Contributing Member
- Posts: 2611
- Joined: Thu Jul 24, 2008 11:15 am
Re: Mad Printer at it again
Absolutely awesome AC!
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Mad Printer at it again
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 8677
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
- ROKCRLER
- 3 Star Elite Contributing Member
- Posts: 597
- Joined: Sun Sep 30, 2018 5:19 pm
-
- 1.5 Star Member
- Posts: 27
- Joined: Thu Aug 16, 2018 12:37 pm
Re: Mad Printer at it again
Nice work that's cool
-
- 6 Star Elite Contributing Member
- Posts: 8677
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Mad Printer at it again
For anyone wanting to get started with 3D printing and looking to purchase a printer, I highly recommend the Monoprice MP Voxel. I have had one for over a year now and it works great with very high quality prints. It is actually manufactured by FlashForge and rebranded for Monoprice. The FlashForge Adventurer 3 is pretty much identical and can be had on Amazon for $369, which is a savings over the Monoprice.
David
https://www.monoprice.com/product?p_id=33820 https://www.amazon.com/Flashforge-Adven ... 2124&psc=1
David
https://www.monoprice.com/product?p_id=33820 https://www.amazon.com/Flashforge-Adven ... 2124&psc=1
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Mad Printer at it again
![Like :Like](./images/smilies/icon_new_like.gif)
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
![Love :Love](./images/smilies/icon_new_love.gif)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 8677
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Mad Printer at it again
More nice parts Tom! Keep up the great work.
David
David
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Dec 05, 2019 10:44 am
Re: Mad Printer at it again
Please can I get the STL Files from you will really help me in some of my projects