mach 3

Mach3 and Mach4 questions, tips and topics can be posted here
Post Reply
mckee ironworks
1 Star Member
1 Star Member
Posts: 16
Joined: Thu Jun 02, 2016 8:50 am

mach 3

Post by mckee ironworks »

on my mach 3 control screen you can adjust your voltage. I am stuck on 120 volts if I'm running a g code or not. I shut everything off and back on still stuck. I usually restart the program and it fixes its self but this time it just is stuck on 120 when I try to increase it goes to 121 and goes back to 120 I click down, and it goes 119 then jumps back to 120. ldr motion systems table . 2016
User avatar
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1982
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: mach 3

Post by djreiswig »

If it's a candcnc control, you're not communicating with the hub. Try unplugging the hub power for a few seconds. That usually does it for me.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
Post Reply

Return to “Mach3 & Mach4 CNC”