round lamp shade

[blacksmithND]

Looking for a drawing for a round lamp shade. I need to make a lamp to go with a Loon table I made a year ago. thanks

[hinesigns]

If we let our minds wonder & think about fire rings as lamp shades????? you should be able to get what ever design you want, just on a smaller scale.I use .050 alum on a lot of projects. This piece I would roll into the circle & pop- rivit the ends together & a shade with lights suspended from the centre of the shade would work depending again on size. I might have one of these made by next week & will send a photo & file.
Now back to the hockey game.

[blacksmithND]

good idea I was thinking cone shaped but that might work. thanks

[1MORECUT]

TELL ME THE SIZE OF CONE AND I WILL MAKE ONE .

[blacksmithND]

thanks 4 inch opening on top 11 inch on bottom about 7 inchs tall. or what works close to that give or take a couple of inches

[hinesigns]

look what I found.cut this on the plotter out of vinyl. Applied it to a piece of Styrene. Cut to shape.
Have at it. Good luck placing the loons or whatever. & shaped it by hand. 4" top opening. 13.5" bottom opening. That allows a 1/2" overlap for pop-rivet. Slope turns out to be about 6.25"

lampshade.dxf

[blacksmithND]

thanks that will work great

[1MORECUT]

HERE THE LAMP SHADE 4" TOP X 11" BOTTOM X 7" H.

[metalart]

I'd like to add my thanks for the files!

[rpage]

Looking for a drawing for a round lamp shade. I need to make a lamp to go with a Loon table I made a year ago. thanks

if you need to do much of this I would suggest this software....

https://store3.esellerate.net/store/che ... atalog.htm

Free to try and not to expensive to buy.


This is not a cone, but a rectangle to square transition. Pretty handy to have. Bookmark this one...

http://www.sheetmetalguy.com/transition.htm

[rpage]

Forgot this link as well....

http://www.sheetmetalguy.com/cones.htm

[blacksmithND]

thanks they will be a big help