-
-
Weekly Free DXF Design
-
Download DXF/SVG
Another one
-
wickedinhere
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Another one
I modified this file for a project but once again sheetcam says it has open paths. I pulled it up in deltacad and inkscape and i cant find any breaks in the lines.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
Chopper John
- 3 Star Elite Contributing Member
- Posts: 370
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Another one
5 on this one.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
wickedinhere
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Re: Another one
Thanks again.LOL what software r u using.
-
Chopper John
- 3 Star Elite Contributing Member
- Posts: 370
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Another one
You're Welcome!
Omax Layout....It came with my waterjet. I just import the drawing and click "clean" and it will join all small gaps within a tolerance I give it and erase any duplicates. It's a very cool program.wickedinhere wrote:Thanks again.LOL what software r u using.
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
trucks1948
- 3 Star Elite Contributing Member
- Posts: 439
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: Another one
i just tried it in corel drawx5 and used the join curves on it closed it up too.
-
wickedinhere
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Re: Another one
THANKS.
