Hello Kitty
-
- 2.5 Star Member
- Posts: 140
- Joined: Thu May 03, 2012 1:29 pm
- Location: St Peters, MO
Hello Kitty
Little girls love them, I have made all of these for my step daughter. I used 1/8 wood and she gets to paint them. Dads get major kuddo's from your girls. I put them in a ZIP file, if you have any problems, I can send them separate.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Member
- Posts: 896
- Joined: Thu Sep 03, 2009 10:43 am
Re: Hello Kitty
Thanks for sharing!
-
- 2 Star Member
- Posts: 70
- Joined: Fri Jun 17, 2011 8:41 pm
Re: Hello Kitty
Thanks for sharing. What did you use to convert these?
Note for others- They are not ready for cutting.
Note for others- They are not ready for cutting.
-
- 2.5 Star Member
- Posts: 140
- Joined: Thu May 03, 2012 1:29 pm
- Location: St Peters, MO
Re: Hello Kitty
I used Adobe Illustrator to convert, then plot out on my CAD table. I am in the box industry so I'm usually just drawing them, but hope to get into plasma cutting in the future.
-
- 4 Star Member
- Posts: 896
- Joined: Thu Sep 03, 2009 10:43 am
Re: Hello Kitty
I couldn't open the gators, I opened the cobra though, so I thought I'd try downloading these, they didn't open for me either. Not sure if they're too big for some of us to open or ????
-
- 2.5 Star Member
- Posts: 140
- Joined: Thu May 03, 2012 1:29 pm
- Location: St Peters, MO
Re: Hello Kitty
Sorry. OK, I re-did the export, Try these.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 78
- Joined: Wed Aug 31, 2011 1:35 pm
Re: Hello Kitty
Made this one more plasma friendly, thanks dwhittington for the files! On a side note is anyone else getting a bunch of double lines on these files? What is the cause of this?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 140
- Joined: Thu May 03, 2012 1:29 pm
- Location: St Peters, MO
Re: Hello Kitty
Sorry Cotton, I didn't check them before exporting.
-
- 1.5 Star Member
- Posts: 35
- Joined: Tue Dec 20, 2011 3:55 am
- Location: Houston,TX
Re: Hello Kitty
Now my gf can leave me alone after I cut her out a dam hello kitty!!!Cotton wrote:Made this one more plasma friendly, thanks dwhittington for the files! On a side note is anyone else getting a bunch of double lines on these files? What is the cause of this?
Im still trying to figure out how I wanna get this one to cut. http://www.ohiofusion.com/wp-content/up ... _alone.jpg
PlasmaRoute Blaze HD 4x4
Thermal Dynamics Cutmaster A60
Thermal Dynamics Cutmaster A60
-
- 1.5 Star Member
- Posts: 35
- Joined: Tue Dec 20, 2011 3:55 am
- Location: Houston,TX
Re: Hello Kitty
Had some lead in issues on the left whisker but kinda looks like it belongs there.
Thanks guys.
Thanks guys.
PlasmaRoute Blaze HD 4x4
Thermal Dynamics Cutmaster A60
Thermal Dynamics Cutmaster A60
-
- 4 Star Member
- Posts: 896
- Joined: Thu Sep 03, 2009 10:43 am
Re: Hello Kitty
Thanks dwhittington, putting it into the zip file did it! I appreciate you taking the time to convert it to zip!!
-
- 2.5 Star Member
- Posts: 171
- Joined: Sun Aug 21, 2011 3:32 am
Re: Hello Kitty
Ah my Daughter will love one of these, Thanks for sharing!
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri Mar 31, 2017 4:39 am
Re: Hello Kitty
Hello, new user how do i download this dxf ?
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2642
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Hello Kitty
In the first post where it says attachments just click on the DXF file.
Larry
Larry
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri Mar 31, 2017 4:39 am
Re: Hello Kitty
That's what he writes in the first post - "You do not have access to download this dxf file.Larry83301 wrote:In the first post where it says attachments just click on the DXF file.
Larry
Become a Contributing Member to gain access to the thousands of files shared by our members"
I do not have rights, You can send me the archive to the mail mason155@mail.ru
many thanks
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2642
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Hello Kitty
Like it says - - -serega911 wrote:That's what he writes in the first post - "You do not have access to download this dxf file.Larry83301 wrote:In the first post where it says attachments just click on the DXF file.
Larry
Become a Contributing Member to gain access to the thousands of files shared by our members"
I do not have rights, You can send me the archive to the mail mason155@mail.ru
many thanks
"You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members"
No one should send you the file. If you want the files on this forum then join in, pay the money and you can gain all the benefits that this forum has to offer!
Larry
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: Hello Kitty
I know this is an old thread, but I have a brand new problem (other than that I actually came here looking for a hello kitty file ) .
I downloaded the dxf file and I can interact/ edit the file (thanks ). I downloaded the zip file and opened it and when I click on those dxf files they did too... kind of. I could see the img as if it were on a sheet of steel with the cuts already made, but as soon as I click on anything it disappears. I can't seem to do anything with any of them. The only way I have been able to do anything is to take a screenshot, paste it into paint.net ( https://www.youtube.com/watch?v=xEzVGRx ... e=youtu.be). then I bring it back into my torchmate cad file and fix it the rest of the way.
I managed to get something my student will like (I think) I was just courious if anyone else has the same problem or any other info on it.
- SegoMan DeSigns
- 4 Star Member
- Posts: 872
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Hello Kitty
I just opened a couple of those files and found a lot of double lines myself, sounds like you have a workaround.
-
- 4 Star Elite Contributing Member
- Posts: 2033
- Joined: Fri Apr 17, 2009 11:48 am
Re: Hello Kitty
ETCWeld, I opened a couple of the dxf's from the zip folder and same as SegoMan I see the double lines. Basically 2 of everything directly on top of each other. When I went to delete one of the doubles everything dissapeared also and I found that was because all the objects were grouped. In Corel I un-grouped everything and was able to 1 by 1 delete all the doubles. Hope this saves you time because bringing these dxfs into Paint your essentially re-drawing/tracing whats already been done. Hopefully this saves you some time and hopefully your CAD software (not sure what your using) will allow you to un-group these.
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: Hello Kitty
Awesome! Alls I had to do before doing anything else, was ungroup it like you said. Man that is so much easier. THANK YOU!
-
- 4 Star Elite Contributing Member
- Posts: 2033
- Joined: Fri Apr 17, 2009 11:48 am