mystery coating, need help to recreate

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
Post Reply
aweston
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Wed Jan 02, 2013 10:06 pm

mystery coating, need help to recreate

Post by aweston »

Hello all. I am looking for help in figuring out a coating a customer wants on a piece. The sample piece shown to me is an orange color with some brown (similar to rust color). The metal was cut apparently with coating already on metal, top and bottom side dross were left on the finished piece. It is so smooth and hard it almost looks like powdercoat, not sure how it was cut with coating already on it (as far as torch sensing). Any suggestions welcome to figure out what it is. I do not have a picture, but can probably get one.
Howserca
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Aug 06, 2013 6:58 pm
Location: Listowel, Ontario

Re: mystery coating, need help to recreate

Post by Howserca »

Is it possibly Corten steel?
Post Reply

Return to “Paint & Other Top Coats”