looking for a Nice air dryer

Hypertherm Plasma Cutter discussion forum.
Post Reply
paul@superbcurb
1 Star Member
1 Star Member
Posts: 13
Joined: Sat Feb 02, 2013 5:57 pm
Location: Laporte, Indiana

looking for a Nice air dryer

Post by paul@superbcurb »

We are looking for a good air dryer priced at a $1000.00 or less and are looking for suggestions. We have a powermax 45. Our current compressor is delivering approx 15cfm but looking to upgrade to a unit with approx 25cfm for a blast cabinet. Thanks for the help guys and gals.
Paul
abmagrum
3.5 Star Member
3.5 Star Member
Posts: 533
Joined: Sun Feb 10, 2013 3:13 pm
Location: mich.

Re: looking for a Nice air dryer

Post by abmagrum »

plasmaspider store has a nice dryer i think like 600.00.

check out old sarge's post my under a $100.00 air dryer

second post quest for dry air part deux.

could save you a ton of money.
Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
MountainGoat
1.5 Star Member
1.5 Star Member
Posts: 36
Joined: Mon May 06, 2013 2:42 am

Re: looking for a Nice air dryer

Post by MountainGoat »

I have a 18cfm compressor....should I buy the 15cfm or the 25cfm dryer?

Cindy .... do you keep these units in stock?
paul@superbcurb
1 Star Member
1 Star Member
Posts: 13
Joined: Sat Feb 02, 2013 5:57 pm
Location: Laporte, Indiana

Re: looking for a Nice air dryer

Post by paul@superbcurb »

Thanks for the suggestions. I'll check into them. Anyone have experience with the one that harbor freight sells?
Post Reply

Return to “Hypertherm Plasma Cutters”