Trying to offset a line.

Corel Draw Graphics Suite related questions and tips can be posted here
Post Reply
User avatar
modelaratrod
2 Star Member
2 Star Member
Posts: 86
Joined: Tue Jul 23, 2013 12:41 pm
Location: Colorado

Trying to offset a line.

Post by modelaratrod »

So here's what I'm trying to do, I would like to be able to cut out just inside of the red, John showed us how to expand the line by using the stroke tool, I would like to reduce the line and only cut the middle. Reason being I'm plate marking on the line and want to cut out just inside the plate marker. So that the detail is done with the plate marker and the plasma will cut where it can fit. I'm using TM Cad 7 and I have Corel Draw X6.
Image
This is in TM Cad 7
Image
Here's where I am so far. I want ot cut out the red outline also.
Image

Any help would be greatly appreciated.
5x10 Torchmate 2 w/AVHC
Hypertherm PM85 w/ machine & hand torch.
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Trying to offset a line.

Post by WyoGreen »

I don't really know, but could you change the kerf width of the tool you're using in Sheetcam? Since Sheetcam calculates the cut-line based on kerf width, if you made the kerf width setting wider, then Sheetcam would offset the cut further. You could plate mark on the inside of the contour, and plasma cut on the outside of the contour. The width of the kerf would be the desired distance between the two.
Like I said, I don't really know, but that's the thought that popped into my head! :!:
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Trying to offset a line.

Post by Gamelord »

Use the contour tool in Corel Draw.

First, import the image in Corel Draw, then "break the curve apart" so that each piece is separate.

Then, select the inside piece that you want to cut 'inside' of.
Then go to your Contour tool flyout. Enter in the size of the contour (distance from the original that you want the line to be), then select the amount of steps (one, unless you want more than that), then make sure that "Inside" is selected and hit apply.

This will draw a line that is perfectly identical and inside of the outer line. Then you will want to make it two pieces.

Select the object, then right click and select "Break Contour Apart". This will take your one object and make it two. Then you can do a couple of different things. You could cut the inner object out of the outer one or you can just save and export it for cutting. If I get time I will do a graphic for you.

Hope that helps.
Attachments
contour.jpg
Last edited by Gamelord on Sat Nov 08, 2014 7:45 pm, edited 2 times in total.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: Trying to offset a line.

Post by muzza »

The way I would do it in Corel is to use the contour tool and create a contour of the original line selecting the inside option and then break contour apart and save the line you want as your new line.
Murray

Edit, Gamelord, you type quicker than me ;)
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Trying to offset a line.

Post by Gamelord »

I gotta be quick to get ahead of you Muzza! LOL
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
cutterguy
2 Star Member
2 Star Member
Posts: 67
Joined: Sat Mar 13, 2010 2:18 pm

Re: Trying to offset a line.

Post by cutterguy »

Wow, this is awesome. Much faster then how I was doing that.

Hats off to you guys that know Corel Draw better then me.

Cutterguy
User avatar
modelaratrod
2 Star Member
2 Star Member
Posts: 86
Joined: Tue Jul 23, 2013 12:41 pm
Location: Colorado

Re: Trying to offset a line.

Post by modelaratrod »

That worked great!! Thanks Muzza & Gameloard.
5x10 Torchmate 2 w/AVHC
Hypertherm PM85 w/ machine & hand torch.
User avatar
modelaratrod
2 Star Member
2 Star Member
Posts: 86
Joined: Tue Jul 23, 2013 12:41 pm
Location: Colorado

Re: Trying to offset a line.

Post by modelaratrod »

Here's one I did with the contour tool, Thanks again!!! :)
Image
5x10 Torchmate 2 w/AVHC
Hypertherm PM85 w/ machine & hand torch.
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Trying to offset a line.

Post by Gamelord »

Awesome!
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Post Reply

Return to “Corel Draw Graphics Suite”