Four Horsemen

[tomloewen]

I just finished this file and first and foremost I'd like thank Sam Todhunter for his amazing artwork! I used Sam's rendition of the Horsemen of the Apocalypse for reference to create this dxf file. And Sam was kind enough to give me permission to post my vector version of his artwork. I suggest you guys check out his website, he's a very talented fella! http://samtodhunter.deviantart.com/

And thanks again to Jason (MetalTorcher). I know basically nothing about the cutting process so Jason goes over my files to make sure they're ready to cut. Thanks Jason

I'm posting two versions of this file. The first version is scaled up so there should be little to no issues for plasma. The problem is though, this version will eat up a 4x8 sheet.

The second version is scaled down to 36" in height and can possibly be used as a railing insert.

Awhile back I was in touch Allan, (OTHill) and talking about railing inserts and we both had the same concerns, simply of someone getting a finger or hand caught in the cutout . . . a very real concern.

We spoke of the possibility of closing in one side with Plexiglas, but also concluded that Plexiglas was not a cheap solution. So I guess it boils down to what a customer wants to spend. Or does someone else have a solution to this?

If someone does cut this out, I'd REALLY appreciate if you could post a picture.
Thanks


NOTICE
Jason found a small issue with the original Horsemen file, so he fixed it and we're re-posting the file.
Tom

Four Horsemen - Railing Insert.dxf

Four Horsemen - final.dxf

[muzza]

Fantastic work Tom, your passion for drawing really comes out in your designs. I look forward to cutting it out but may be a couple of weeks before I catch up and get time to do it.
Thanks
Murray

[tomloewen]

Fantastic work Tom, your passion for drawing really comes out in your designs. I look forward to cutting it out but may be a couple of weeks before I catch up and get time to do it.
Thanks
Murray

Great Murray, nice to hear from you.
Tom

[cbassjr]

All I can say is WOW! Thanks for great work!!!!

[HellfireOffroad]

Nice work!! Thanks for sharing.

[beefy]

Much appreciated Tom.

Not every day we get one like that.

Keith.

[CNCCAJUN]

That looks fantastic . . .

You know I love your work . . . Your two little cowboys is the first real file I every cut on my table . . . .

And I still have it . . .

Looks great . . .
Steve

[tomloewen]

That looks fantastic . . .

You know I love your work . . . Your two little cowboys is the first real file I every cut on my table . . . .

And I still have it . . .

Looks great . . .
Steve

oh that's cool to hear! thanks

[Shane Warnick]

WOW!! Thanks for the file. I have to say that is one of the best (and cleanest cut ready files) I have seen on here for free. You could be making some scratch off of those, I am sure you put enough time into them that you should be getting paid. Thanks again for posting it. If I cut it I will definitely put up a picture. I am thinking the railing insert would make a great table top. I have a local woodworker guy that makes large tables out of barn timbers etc, and he is always buying stuff for the tops that are skulls etc. I bet this powdercoated with a large sheet of glass over it on top of a table made with barn timbers would look awesome.

Thanks again
Shane

[tomloewen]

WOW!! Thanks for the file. I have to say that is one of the best (and cleanest cut ready files) I have seen on here for free. You could be making some scratch off of those, I am sure you put enough time into them that you should be getting paid. Thanks again for posting it. If I cut it I will definitely put up a picture. I am thinking the railing insert would make a great table top. I have a local woodworker guy that makes large tables out of barn timbers etc, and he is always buying stuff for the tops that are skulls etc. I bet this powdercoated with a large sheet of glass over it on top of a table made with barn timbers would look awesome.

Thanks again
Shane

THAT IS ONE HECK OF AN IDEA! I never thought of a table top. And thanks for your kind words, all of you guys! And the clean cut ready part is thanks to Jason.

[SeanP]

Great skill there! drawings are top notch,,,,,,,many thanks

[grindergary]

Awesome work Tom,
Glad you finally got to get it posted. If I get the time, I will cut one and post pictures.

Darn work keeps getting in the way.

Gary

[tomloewen]

Awesome work Tom,
Glad you finally got to get it posted. If I get the time, I will cut one and post pictures.

Darn work keeps getting in the way.

Gary

Thanks Gary

[conradestrada]

That is one sweet piece of work you are amazing! Thanks

[chasxjs]

Absolutely incredible. Thanks for posting,

[MetalheadRK]

This is amazing work. Thank you so much for posting.

[hacnwac]

Thanks for the file. I don't know what I will use it for just yet but I can only hope that whatever project I do make comes even close to doing your file justice.
Mark

[tomloewen]

Thanks for the file. I don't know what I will use it for just yet but I can only hope that whatever project I do make comes even close to doing your file justice.
Mark

thanks for your thoughtful comments, all you guys
Tom

[hdfaster]

Very nice! Thanks for sharing what must have taken quite a bit of time to do. The detail is great!

[m79b01]

Amazing! Thanks for the share.

[otisa2007]

As always awesome work wish i had just a fraction of your talent thanks for the share

[HammerDownJustin]

Thank you and great talent you have

[Buzzard Gut]

Wow Tom!!! Excellent Job!! That looks really COOL!!!

[tomloewen]

WOW!! Thanks for the file. I have to say that is one of the best (and cleanest cut ready files) I have seen on here for free. You could be making some scratch off of those, I am sure you put enough time into them that you should be getting paid. Thanks again for posting it. If I cut it I will definitely put up a picture. I am thinking the railing insert would make a great table top. I have a local woodworker guy that makes large tables out of barn timbers etc, and he is always buying stuff for the tops that are skulls etc. I bet this powdercoated with a large sheet of glass over it on top of a table made with barn timbers would look awesome.

Thanks again
Shane

Shane, you mentioned an insert for coffee tables. What would be an average size you would cut out?
Tom

[crazy59860]

You could sell your files online, then you wouldn't have to worry about the other stuff.......This is absolutely wonderful!! I would buy your files online.....