tool holder
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
tool holder
I was going to start selling them but it never happened I have 3 of them in my shop and they hold over 37 tools in one spot the on line tool path are bend lines
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 67
- Joined: Sat Feb 21, 2015 5:18 pm
- Location: Mt. Pleasant
Re: tool holder
Thanks for sharing do you have a pic of it all finished ?
-
- 1 Star Member
- Posts: 16
- Joined: Thu Jan 24, 2013 4:31 pm
Re: tool holder
Thanks for the download, do you have any pics of the type of tools loaded into them?
-
- 4 Star Member
- Posts: 1008
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
Re: tool holder
I can use that. Thanks for the post.
Jim
Jim
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
Re: tool holder
How about a video https://m.youtube.com/watch?v=_AgGwDr9BfI
-
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: tool holder
Kool videomodnoc13 wrote:How about a video https://m.youtube.com/watch?v=_AgGwDr9BfI
Thanks for the file.
Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
- 2 Star Member
- Posts: 76
- Joined: Fri Jul 01, 2011 10:47 pm
- Location: Tulliby Lake Alberta Canada
Re: tool holder
Thanks Dude
I am going to make one for work and one for home.....
Solomanb
I am going to make one for work and one for home.....
Solomanb
-
- 4.5 Star Member
- Posts: 1504
- Joined: Fri Jan 18, 2013 3:19 am
Re: tool holder
Thanks heaps Modnoc13,
I absolutely love tool storage stuff, yours is a good one. I often look at how wasteful of space some storage ideas are. It's amazing just how much stuff you can cram into a given space with careful design.
Love the bit at the end of the video, and that tool is built in for free
Keith.
I absolutely love tool storage stuff, yours is a good one. I often look at how wasteful of space some storage ideas are. It's amazing just how much stuff you can cram into a given space with careful design.
Love the bit at the end of the video, and that tool is built in for free
Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: tool holder
thanks for sharing
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: tool holder
Thanks for posting look like it has a place on most shops
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3 Star Member
- Posts: 394
- Joined: Sun Jan 02, 2011 11:03 pm
Re: tool holder
What are the three "teeth" for in the rectangle that holds grinder discs? I watched the video but couldn't pick those out.
Thanks for the file!
Thanks for the file!
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: tool holder
Similar to Troy's Clutter Catcher from SWAG...
I like the Grinder racks the best, I modified the design to hold just the three grinders, what do you make it from?
11 Ga?
I like the Grinder racks the best, I modified the design to hold just the three grinders, what do you make it from?
11 Ga?
-
- 2 Star Member
- Posts: 72
- Joined: Fri Dec 26, 2014 9:52 am
- Location: Mexico Beach, FL
Re: tool holder
Man that is AWESOME! Thanks for posting! Can't wait to get one built for my shop.
I need to come up with something like this for my kids toys. Always tripping over a scooter or a nerf gun. Better yet a rack to hang the kids on! Nothing worse than bending over concentrating on a off balance weld and getting nailed in the back by a foam bullet!
BC
I need to come up with something like this for my kids toys. Always tripping over a scooter or a nerf gun. Better yet a rack to hang the kids on! Nothing worse than bending over concentrating on a off balance weld and getting nailed in the back by a foam bullet!
BC
-
- 1.5 Star Member
- Posts: 37
- Joined: Tue Nov 11, 2014 5:13 pm
Re: tool holder
awesome design, awesome video. A big thank you.
-
- 1.5 Star Member
- Posts: 47
- Joined: Fri Mar 15, 2013 11:33 am
Re: tool holder
thanks so much! Looks like will really help me unclutter my table!
chattacuda from Dayton, Tennessee
CandCNC electronics, Precision Plasma V rail gantry, homemade 4'x8' water table, Sharpe Air Dryer
Hyperthem 45XP, CommandCNC, Sheetcam, Corel Draw
CandCNC electronics, Precision Plasma V rail gantry, homemade 4'x8' water table, Sharpe Air Dryer
Hyperthem 45XP, CommandCNC, Sheetcam, Corel Draw
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 333
- Joined: Mon Jul 25, 2011 9:30 pm
Re: tool holder
Thanks !
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
-
- 1 Star Elite Contributing Member
- Posts: 20
- Joined: Mon Aug 15, 2011 1:31 pm
Re: tool holder
Thank you for the share, cut one last night and cleared up all the crap I had on my welding table... Dave
-
- 2.5 Star Member
- Posts: 161
- Joined: Wed Dec 21, 2011 4:43 pm
Re: tool holder
I am impressed god only knows most of us are type "A" personalities just look at the smart ass comments. And he also knows we are not organized at all look at our photos shit every where. I will damn sure cut one of those out and weld one to all six tables and now my guy's have no excuse they can't find shit THANKS A BUNCH! And thanks for the video cuz god also knows this A.D.D. does not let me sit long enough to read instructions! Great Job
-
- 2 Star Member
- Posts: 81
- Joined: Wed Jan 07, 2015 7:15 pm
- Location: North Central Texas.
Re: tool holder
VERY NICE!!
Thanks for the share!!
Might you have a .DXF file of the guy tig welding in your logo?? My son is in welding school and burning lots of rod in his TIG lab and it would be cool for a receiver hitch cover.
Thanks again for the organizer!!
Thanks for the share!!
Might you have a .DXF file of the guy tig welding in your logo?? My son is in welding school and burning lots of rod in his TIG lab and it would be cool for a receiver hitch cover.
Thanks again for the organizer!!
- Ghost
- 2 Star Member
- Posts: 51
- Joined: Tue Aug 06, 2013 2:26 pm
- Location: Richland, MS
- Contact:
Re: tool holder
Very nice setup modnoc13, thanks for sharing.
One question what is the standard overall size you cut these to? L X W
Thanks,
Jason
One question what is the standard overall size you cut these to? L X W
Thanks,
Jason
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
Re: tool holder
Yes that is the size I cut them tooGhost wrote:Very nice setup modnoc13, thanks for sharing.
One question what is the standard overall size you cut these to? L X W
Thanks,
Jason
- Ghost
- 2 Star Member
- Posts: 51
- Joined: Tue Aug 06, 2013 2:26 pm
- Location: Richland, MS
- Contact:
Re: tool holder
modnoc13 wrote:Yes that is the size I cut them tooGhost wrote:Very nice setup modnoc13, thanks for sharing.
One question what is the standard overall size you cut these to? L X W
Thanks,
Jason
No I was asking you what is the L X W you cut them to?
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
- Ghost
- 2 Star Member
- Posts: 51
- Joined: Tue Aug 06, 2013 2:26 pm
- Location: Richland, MS
- Contact:
Re: tool holder
modnoc13 wrote:23 by 11.7024 is the cut size
Thanks!!!!