gantry rail
-
tannje3
- 1 Star Member
- Posts: 13
- Joined: Sun Nov 22, 2020 9:40 am
gantry rail
Building a 5x10 table, have the 2x2 gantry rail cars. knowing this will be spanning 10' what metal thickness 2x2 square tubing would you make this?
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 7799
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: gantry rail
Watch your corners the thicker the wall the rounder the corners become. I use 11 Ga. for mine but they are not that long, I also use a 3/16" X 2" X 3" angle welded to the bottom for more support.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 8668
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: gantry rail
acourtjester wrote: ↑Mon Nov 23, 2020 4:25 pm Watch your corners the thicker the wall the rounder the corners become. I use 11 Ga. for mine but they are not that long, I also use a 3/16" X 2" X 3" angle welded to the bottom for more support.
