long time lurker, FNG

[44magyota]

Hello everyone,

I'm a long time lurker to this forum. I'm a professional structural fabricator and welder. Have been the main operator of a home built plasma table in our shop for over a year now. I'm no professional plasma table guru..im here to learn.

[plasmanewbie]

Welcome to the forum, plenty of info and help here. Have fun and post your questions.

[acourtjester]

Welcome aboard, did you build thee table you are using?? Questions and projects are always welcome, many varied members for all over the world

[44magyota]

I did not build the plasma table im running. Although I have made a plethora of modifications in the last year or so to make it run better. Latest update is newest mach4 and sheetcam software as well as a warprunner board to run the THC that never worked before. And that had created more issues to work out and a steep learning curve.

[acourtjester]

Well it seems you have a good working knowledge of the table and its control/software. You can have a quick look around by using the search function in the upper right. You may find answers for questions you may have or post questions you may have. Be sure to include the software (Mach 4) or other software you may have questions about. Have fun
Tom

[adbuch]

Welcome to the forum! It sounds like you are having fun fixing up and modifying your diy table. Let us know if you have specific questions and there are plenty of folks here ready and willing to try to help you out.
David