Kubota L2501 Grill Guard File

[Bearbie]

Was wondering if anyone had a file to cut a grill guard out for a Kubota L2501 Tractor

[J-SIG]

Was wondering if anyone had a file to cut a grill guard out for a Kubota L2501 Tractor

Are you looking for the insert, like this?

Kabota insert.jpg

[Bearbie]

J-Sig That is what i am looking for.

[Rex]

Not looking for one but that sure is pretty
nice work

[DieselFumes]

Super cool Jeff, looks awesome

[J-SIG]

J-Sig That is what i am looking for.

Not a current design I have! Pic is from online, but would be an easy one to do if I had the dimensions I needed for the O.D. of insert! I did one of an older model for a friends L5740 but not sure how close yours is! If you did an outer border it would be easy to make! Just add some bend lines after the slots and holes and go for it!
Would be glad to help!

Jeff

[jtpdesigns27]

thats a good idea

[adbuch]

I sure like the looks of that orange one! Nice find Jeff. As you mention, once you have the dimensions for the outline - the rest is "cake".
David

[ben de lappe]

I drew this from pics to client specs a few years ago, didn't hear back but 'assume' it fits well. If it helps you're welcome to it. Overall 21"x25.2" with mounting tabs.

Kubota L2501_Grill.dxf

Kubota L2501_Grill.svg

[plasmanewbie]

Wow Ben, looks great! Thanks for sharing.

[Bearbie]

ben de lappe Thanks for the share i will see if this will work on my Kubota L 2501

[ben de lappe]

Wow Ben, looks great! Thanks for sharing.

Thank you Newb!

ben de lappe Thanks for the share i will see if this will work on my Kubota L 2501

You are most welcome and I look forward to an update.

[adbuch]

Very nicely done Ben! I hope the OP can use it.
David

[ben de lappe]

Very nicely done Ben! I hope the OP can use it.
David

Thank you very much and that's two of us. Should be close if not exact. Certainly the best I could do from a pic and the dimensions he supplied. Worst case scenario I figure keep the interior and modify the profile/tabs if necessary.

I must admit to a slight bit of jealousy as my little BX 2350 D can't use it.

[ben de lappe]

I completely forgot about this image showing the supplied dimensions this piece was draw to. Maybe it'll help in this process.

Kubota Grill_Dimensions.png

[Bearbie]

Here is a grill I designed for my Kubota L2501. If you use this design, check the measurements to what your tractor needs and adjust to your needs. I used automobile undercoating to paint this grill since I had no access to powder coating.

Kubota 2501 Master File Star Grill.svg

Kubota 2501 Master File Star Grill.dxf

Kubota 2501 Master File Star Grill.cdr

[J-SIG]

Here is a grill I designed for my Kubota L2501. If you use this design, check the measurements to what your tractor needs and adjust to your needs. I used automobile undercoating to paint this grill since I had no access to powder coating.

I like it!
Hope you share a finished pic
of it on your tractor!

Thanks!
Jeff

[adbuch]

Here is a grill I designed for my Kubota L2501. If you use this design, check the measurements to what your tractor needs and adjust to your needs. I used automobile undercoating to paint this grill since I had no access to powder coating.

That looks great! Nice job. I too hope to see the finished product photos.

David

[Bearbie]

Here is the actual cut grill haven't had the chance to install it on the tractor yet.will post those pictures when I get it installed.

20230317_141151.jpg

20230317_141142.jpg

20230317_141126.jpg

20230317_141213.jpg

[adbuch]

This looks very nice! Thanks for sharing your finished part.

David

[J-SIG]

Looks Great!
The undercoating will give a tough finish
and be easier to touch up if it gets scratched!


Jeff

[AREA]

Thats a pretty sweet looking grill! Well done

[Superjet511]

Wow. That looks familiar.

20201109_160758.jpg

[Hilsmat1]

I completely forgot about this image showing the supplied dimensions this piece was draw to. Maybe it'll help in this process.

Kubota Grill_Dimensions.png

Ben, this looks amazing! I'm going to modify this file to fit a 2601. Thanks for the share, if I can make it work, I'll share it on here!

Matt