Python X cnc
-
McDonald98
- 1/2 Star Member
- Posts: 1
- Joined: Sat Sep 11, 2021 4:59 am
Python X cnc
Does anyone use Python X Structural CNC, the plasma that cuts beams, angles , box sections etc.
-
MulletAndMustache
- 1/2 Star Member
- Posts: 1
- Joined: Fri Sep 15, 2023 2:46 pm
Re: Python X cnc
We have one at work that I operate and make the files for. It's a total POS. Spend the extra money on a Voortman machine or anything else. The Python has literally the worst CnC software I've ever used. My $3000 hobby full spectrum co2 laser at home has better software and support.
I found this thread while looking for actual Python X forums because I'm pissed that they're trying to charge us $1000 for 4 support emails... We wouldn't have to contact them nearly as much if they had a wiki or forums or good documentation. As there's over 500 error codes that the machine can trip there's a few issues that you'll run into.
Anyway I'll post bad press about the Lincoln Python X whenever possible to warn people off of that machine.
I found this thread while looking for actual Python X forums because I'm pissed that they're trying to charge us $1000 for 4 support emails... We wouldn't have to contact them nearly as much if they had a wiki or forums or good documentation. As there's over 500 error codes that the machine can trip there's a few issues that you'll run into.
Anyway I'll post bad press about the Lincoln Python X whenever possible to warn people off of that machine.
