Hi, first post in the forum. Totally new to plasma cutting and computer design. I know how to use the plasma table abvailable to me using ready made progammes but thats the extent of my knowlage so far.
Would anyone be able to help convert the png/ svg attached to a workable dxf? prefferably so the centres of the lettering doesnt fall out when its cut.
Many thanks if anyone is willing to help out.
-
-
Weekly Free DXF Design
-
Download DXF/SVG
British special forces logo
-
FubarPhillip
- 1/2 Star Member
- Posts: 3
- Joined: Sun Feb 04, 2024 4:45 am
British special forces logo
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11345
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: British special forces logo
This one will convert very nicely and quickly using Inkscape to trace and stencil the letters so the centers don't fall out. Here is a quick result. Depending on how close you want (or need) it to be to your original, it could be edited to delete some details and thicken up some of the areas as AK has shown.
Your original on the right, and the vector file (svg or dxf) on the left.
David
Your original on the right, and the vector file (svg or dxf) on the left.
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
