Dynatorch board cooked

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
Rockchucker
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Thu Jan 04, 2024 1:42 pm

Dynatorch board cooked

Post by Rockchucker »

Hi all.
Ive got a dynatorch XLR-8 table with hypertherm maxpro200 source. I was having motor communications problem and discovered that my interface(?) board is no good. cant find a replacement board and also kinda want to upgrade the software part anyway. my question is, can i fix this without replacing EVERRYTHING from the computer to the rack and pinions? Having trouble getting info because quite honestly I dont know what questions to ask
User avatar
ROKCRLER
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 626
Joined: Sun Sep 30, 2018 5:19 pm

Re: Dynatorch board cooked

Post by ROKCRLER »

Have you called Russell? He should be able to help with replacement part.
https://cncshopandservice.com/contact-us/
(256) 812-9128
4x8 Dynatorch
PM85
~Mo~
Rockchucker
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Thu Jan 04, 2024 1:42 pm

Re: Dynatorch board cooked

Post by Rockchucker »

I did . Hes been very helpful with pure knowledge but doesnt have a board or know where I can find one
User avatar
SegoMan DeSigns
4 Star Member
4 Star Member
Posts: 901
Joined: Sat Jan 06, 2018 4:45 pm

Re: Dynatorch board cooked

Post by SegoMan DeSigns »

Look at the board with a magnifying glass to get the number off of it. Then google that number, you may get lucky.
Post Reply

Return to “Various Manufacturers Forum”