IN NEED OF A CROSS FILE
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Mar 25, 2009 9:15 pm
IN NEED OF A CROSS FILE
I would like to get a cross file for the holidays. I thank you in advance since i'm barely on-line.
-
- 2.5 Star Member
- Posts: 105
- Joined: Tue Feb 08, 2011 11:02 am
- Location: Haslet, TX
-
- 3 Star Member
- Posts: 425
- Joined: Wed Sep 29, 2010 12:19 am
Re: IN NEED OF A CROSS FILE
signtorch has about 30 different crosses on one of his bundles. Can't remember which.
WSS
WSS
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1707
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: IN NEED OF A CROSS FILE
here a couple from Steve Good Scroll Saw patterns, he given permission to use
![Image](https://www.plasmaspider.com/images/EasterCrossF3.png)
![Image](https://www.plasmaspider.com/images/AmazingCrossF3.png)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 19
- Joined: Tue Nov 30, 2010 10:41 am
- Location: Lubbock, TX
Re: IN NEED OF A CROSS FILE
I made these for my wife. She painted and decorated them.
I just took the dxf from one of these postings and put a font in the middle of the cross. These are the cut paths from my Torchmate CAD.
I just took the dxf from one of these postings and put a font in the middle of the cross. These are the cut paths from my Torchmate CAD.
![Image](https://www.plasmaspider.com/images/LoveCrossF3.png)
![Image](https://www.plasmaspider.com/images/HopeCrossF3.png)
![Image](https://www.plasmaspider.com/images/FaithCrossF3.png)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
If you can't fix it with a hammer, it's an electrical problem.
Plasmacam 4'x4' table
hypertherm 1250
Plasmacam 4'x4' table
hypertherm 1250