I need help with a trace of the US Navy Guantanamo Bay Seal. A customer wants a mirror cut out of it. Thanks!
-Brian
Guantanamo Bay Seal US Navy I Think I Got it
-
- 2 Star Member
- Posts: 86
- Joined: Wed Jun 15, 2011 2:07 pm
-
- 2 Star Member
- Posts: 86
- Joined: Wed Jun 15, 2011 2:07 pm
Re: Guantanamo Bay Seal US Navy I Think I Got it
After many tedious hours, I was able to get pretty close with the trace I was needing (much to my suprise). I used the rope design from a Marine Corps Seal that I got from this site. Other than that I was able to pull it off with Corel and Plasma Cam (learning as I go). The file isn't 100% cut ready yet, but if someone else needs the design, here's a rough draft. I included some hangers on the file that I use on the backs of clocks and mirror frames to hang them by. Just bend each end down to a 90 about a quarter of an inch up, weld to the back and there you have it. Sorry the file is in a PCM format, I can't export DXF without the $1000.00 upgrade. Hopefully another member on the forum can convert it over and upload it again.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 8
- Joined: Wed Jun 09, 2010 7:17 am
- Location: Wa. State
-
- 2.5 Star Member
- Posts: 118
- Joined: Wed May 16, 2012 5:31 pm
- Location: San Marcos, Texas
Re: Guantanamo Bay Seal US Navy I Think I Got it
Heres the DXF
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Few problems in life can't be solved with the generous application of a cutting torch and a taco truck.... or something like that.....
-
- 1.5 Star Member
- Posts: 37
- Joined: Fri Mar 30, 2012 10:57 pm
Re: Guantanamo Bay Seal US Navy I Think I Got it
nice job looks great
-
- 1 Star Member
- Posts: 17
- Joined: Thu Oct 07, 2021 8:20 am
Re: Guantanamo Bay Seal US Navy I Think I Got it
I'm not sure if I'll cut this for our American Legion or not yet but either way thank you for taking the time to make this and share it!