PLEASE HELP ME WITH HEIGHT CONTROL
-
pemery
PLEASE HELP ME WITH HEIGHT CONTROL
Help with my height control. I do not know what setting i should use to cut new a-36 steel. Please help. Height control works fine till cutting then will all of a sudden dive towards material.
-
pemery
Re: PLEASE HELP ME WITH HEIGHT CONTROL
Ohh it is a dhc2 2009 model with the older plasmacam software.
-
Mountain Home
- 2.5 Star Elite Contributing Member
- Posts: 243
- Joined: Tue Nov 17, 2009 10:39 pm
- Location: AR, USA
Re: PLEASE HELP ME WITH HEIGHT CONTROL
Try checking the " auto calibrate z shifts" in the height control settings, then cut a test line.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
geo4932
- 2 Star Member
- Posts: 96
- Joined: Mon Jan 25, 2010 9:22 am
Re: PLEASE HELP ME WITH HEIGHT CONTROL
I see this is an old post.pemery wrote:still just dives towards the table.
You did not say which nozzle you have on the torch, the cut speed and amperage. The function for the height control is based on those items and is then is calibrated with the Arc Voltage Shift. As a rule of thumb, increase the Arc Voltage Shift until the torch quits diving.
George
