Jeep - Drivers Foot Peg
-
- 1.5 Star Member
- Posts: 28
- Joined: Sat Jul 12, 2014 5:29 am
Jeep - Drivers Foot Peg
I am looking for a dxf of something similar to this, or anything to do with a foot peg for a jeep.
Thanks.
Thanks.
-
- 2.5 Star Member
- Posts: 111
- Joined: Fri Aug 08, 2014 8:00 am
Re: Jeep
These are cool!
http://www.facebook.com/WinterFabrication
Matt
CandCNC Ethercut
Precision Plasma Gantry
Hypertherm Powermax 45
Matt
CandCNC Ethercut
Precision Plasma Gantry
Hypertherm Powermax 45
- 68Percy
- 2 Star Member
- Posts: 88
- Joined: Thu Jun 25, 2015 7:20 pm
- Location: Loranger, Louisiana
Re: Jeep
I used a similar pic to try and made a set of foot pegs for my dad's jeep. I cut the driver's side out and haven't been able to test fit yet (he's working out of state). I cut this file on the waterjet at work. It should do alright on a plasma. I used 3/16" plate. Let me know how they fit. I've been reluctant to ask a random person with a jeep if they mind taking the doors off for a second. Haha.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Austin Lanier
Dirt Road Metal Works, LLC
"Too much of a business to be a hobby, too much of a hobby to be a business"
Dirt Road Metal Works, LLC
"Too much of a business to be a hobby, too much of a hobby to be a business"
-
- 3 Star Member
- Posts: 345
- Joined: Mon Feb 23, 2015 5:23 pm
- Location: Austin, TX
Re: Jeep
How do those stop them from spinning forward into the painted surface?
- 68Percy
- 2 Star Member
- Posts: 88
- Joined: Thu Jun 25, 2015 7:20 pm
- Location: Loranger, Louisiana
Re: Jeep
There's a 1" wide tab that bends down 90deg and it bumps against the hinge plate on the jeep. At least that's how mine work the way i have it drawn up.
Austin Lanier
Dirt Road Metal Works, LLC
"Too much of a business to be a hobby, too much of a hobby to be a business"
Dirt Road Metal Works, LLC
"Too much of a business to be a hobby, too much of a hobby to be a business"
-
- 1/2 Star Elite Contributing Member
- Posts: 5
- Joined: Wed Jul 05, 2017 5:55 pm
Re: Jeep
Gave it a shot tried it on my JKU. Fits pretty good the only thing that I can come up with as far as change or fit, is the 1 inch stop tab is to far forward, does not swing it out far enough for my leg. Idk just an opinion. Thanks for the file..
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Peechy
- 3 Star Elite Contributing Member
- Posts: 338
- Joined: Tue Nov 11, 2014 9:12 pm
- Contact:
Re: Jeep - Drivers Foot Peg
Thanks for the share !
- 68Percy
- 2 Star Member
- Posts: 88
- Joined: Thu Jun 25, 2015 7:20 pm
- Location: Loranger, Louisiana
Re: Jeep
Yeah man I had to do some serious tweaking to that drawing after I test fit. I ended up moving the hole location and narrowing the tab. I also changed a bunch of other dimensions for it to stop at a comfortable angle.Mort wrote:Gave it a shot tried it on my JKU. Fits pretty good the only thing that I can come up with as far as change or fit, is the 1 inch stop tab is to far forward, does not swing it out far enough for my leg. Idk just an opinion. Thanks for the file..
Austin Lanier
Dirt Road Metal Works, LLC
"Too much of a business to be a hobby, too much of a hobby to be a business"
Dirt Road Metal Works, LLC
"Too much of a business to be a hobby, too much of a hobby to be a business"
-
- 2.5 Star Member
- Posts: 106
- Joined: Sun Aug 21, 2011 12:41 pm
Re: Jeep
Can you post updated file?68Percy wrote:Yeah man I had to do some serious tweaking to that drawing after I test fit. I ended up moving the hole location and narrowing the tab. I also changed a bunch of other dimensions for it to stop at a comfortable angle.Mort wrote:Gave it a shot tried it on my JKU. Fits pretty good the only thing that I can come up with as far as change or fit, is the 1 inch stop tab is to far forward, does not swing it out far enough for my leg. Idk just an opinion. Thanks for the file..
-
- 1/2 Star Elite Contributing Member
- Posts: 5
- Joined: Wed Jul 05, 2017 5:55 pm
Re: Jeep - Drivers Foot Peg
Here is my revised version pretty happy with the fit. Cant decide if i want to paint or something like platsidip, anyway try it out tell me what you think.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 31
- Joined: Tue Jan 03, 2017 7:05 am
Re: Jeep - Drivers Foot Peg
Help,?
File cut great, bent up nice! can't figure out how it attaches?
Chip
File cut great, bent up nice! can't figure out how it attaches?
Chip
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1952
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Jeep - Drivers Foot Peg
Looks like you put a bolt through the peg and the hinge. Pretty clear in the picture above.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Feb 28, 2019 6:55 pm
Re: Jeep - Drivers Foot Peg
I cut one of these out last month and have had the doors off my jeep for a couple days. I sandblasted the part and had it sprayed with bedliner, I couldnt be happier with the product
- SegoMan DeSigns
- 4 Star Member
- Posts: 863
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Jeep - Drivers Foot Peg
Guess I'll be the hated safety guy on this one but feet / arms belong inside the jeep in case of a roll over. Every year at the Moab jeep safari people roll over while bracing on the roll cage only to have fingers smashed and or removed. Install 5 point harnesses and keep all appendages inside the machine. Hang onto the grab bar on the passenger side and steering wheel on the drivers sides /// Flame Away
-
- 1.5 Star Member
- Posts: 31
- Joined: Tue Aug 20, 2019 2:02 am
Re: Jeep - Drivers Foot Peg
This is still a good idea if your not extreme 4 wheelin. Thx for the share
-
- 1/2 Star Member
- Posts: 9
- Joined: Sat Mar 07, 2020 9:09 am
Re: Jeep
I know this is an old post....but still a good one68Percy wrote: βWed Aug 12, 2015 10:16 am I used a similar pic to try and made a set of foot pegs for my dad's jeep. I cut the driver's side out and haven't been able to test fit yet (he's working out of state). I cut this file on the waterjet at work. It should do alright on a plasma. I used 3/16" plate. Let me know how they fit. I've been reluctant to ask a random person with a jeep if they mind taking the doors off for a second. Haha.
Jeep Foot Peg.dxf
I cut a few of these out with my PlasmaCAM for some Jeep buddies and they LOVE them! Powder coated them as they waited. Looks great in a wrinkle black texture coating.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 13
- Joined: Thu Nov 27, 2014 9:18 am
Re: Jeep - Drivers Foot Peg
I've had this file for years and just finally cut one to test a few weeks back. Cuts really good. Added a few extra details. This one was 16ga and is too flimsy, but mainly wanted to see if it would work. Thinking 10ga should be thick sturdy enough. I also need to size it down a bit.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here