Kid's Hummer chair
-
- 2.5 Star Member
- Posts: 178
- Joined: Sat Oct 23, 2010 5:22 pm
Kid's Hummer chair
This is another to go in the kids chair line. I did it for one of my grand sons
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 178
- Joined: Sat Oct 23, 2010 5:22 pm
Re: Kid's Hummer chair
I forgot to say thank you to the orginal person that posted the hummer file, I just adapted it into a chair.
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 464
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: Kid's Hummer chair
very nice thankyou
- little blue choo
- 4 Star Member
- Posts: 1461
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Kid's Hummer chair
awesome !! Thanks for sharing.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- little blue choo
- 4 Star Member
- Posts: 1461
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Kid's Hummer chair
Kevin, what gauge did you cut this out of?
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 3 Star Member
- Posts: 284
- Joined: Sun Dec 08, 2013 9:05 pm
Re: Kid's Hummer chair
Really nice will make this one for my son! Thanks for sharing
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Kid's Hummer chair
Nice job and thank you
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 2.5 Star Member
- Posts: 150
- Joined: Sat Dec 21, 2013 11:13 pm
- Location: Hallsville, Tx
- Contact:
Re: Kid's Hummer chair
SWEET! THANKS FOR THE FILE!!
STEVE
STEVE
Stephen W. Sparks RN,CRN
Creating Sparks Metal Worx
Arclight Dynamics Arc Pro 12000 5X10
Linux, Sheetcam, Inkscape, Solid Edge
Hypertherm 85
MIllermatic 175
AHP Alphatig 200X
Kool Koat 3.0 DPW
"Ridin around having a big time!"
Creating Sparks Metal Worx
Arclight Dynamics Arc Pro 12000 5X10
Linux, Sheetcam, Inkscape, Solid Edge
Hypertherm 85
MIllermatic 175
AHP Alphatig 200X
Kool Koat 3.0 DPW
"Ridin around having a big time!"
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Kid's Hummer chair
Thanks for sharing
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 4.5 Star Elite Contributing Member
- Posts: 1643
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Kid's Hummer chair
Thanks, great idea!
Dave Hanks
Dave Hanks
-
- 1 Star Member
- Posts: 15
- Joined: Mon Jun 16, 2014 7:10 pm
Re: Kid's Hummer chair
Thanks for the share! I went through and squared things up some. You can see from the lower control arm it was all shifted over. Awesome work, hope you don't take me editing it as being disrespectful cause I truly don't mean to. I just cut it out myself and thought I would true the geometry up. I only noticed after I got it all cut. I also added a different design for hood/ bench. 11/29/2015 I deleted original file I uploaded cause I realized I hadn't checked alignment so I updated the file again. Now has tab and slot design. Test your kerf with a scrap piece before cutting on a tab and slot design so you can adjusted kerf offset accordingly. Also checked over alignment issues. I haven't cut since I edited but I believe it is good to go now.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by SSLLC on Sun Nov 29, 2015 3:38 pm, edited 2 times in total.
Andrew Spurr Owner of SS LLC Est. 2011
Miller Millermatic 252, Miller Millermatic 212 Autoset, Miller Bobcat 225, Miller Syncrowave 210
Lincoln LN25
JD2 Programmable Bender
Thermodynamics 42
Hypertherm 45, 65 with machine torch
Trucut Series One 4x8
Miller Millermatic 252, Miller Millermatic 212 Autoset, Miller Bobcat 225, Miller Syncrowave 210
Lincoln LN25
JD2 Programmable Bender
Thermodynamics 42
Hypertherm 45, 65 with machine torch
Trucut Series One 4x8
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: Kid's Hummer chair
Thanks for the file. Grandkids are always wanting a ride in Nanna's Hummer. Maybe these chairs will substitute.
-
- 3 Star Member
- Posts: 373
- Joined: Thu May 28, 2015 8:02 am
- Location: Merritt island fl.
Re: Kid's Hummer chair
like he said what gauge ,,an thanks that is bad a,,,,,,,,,little blue choo wrote:Kevin, what gauge did you cut this out of?
-
- 2.5 Star Member
- Posts: 178
- Joined: Sat Oct 23, 2010 5:22 pm
Re: Kid's Hummer chair
you can do all the editing that you want. another set of eyes can see things that I did not that can improve it. Here is another one that I did using Snoopy.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 178
- Joined: Sat Oct 23, 2010 5:22 pm
Re: Kid's Hummer chair
FORGOT THE DXF. I MADE THEM ALLOUT OF 10ga
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 36
- Joined: Sat Jun 06, 2015 12:27 pm
- Location: atwater, ca
Re: Kid's Hummer chair
thank you, those are great
-
- 1 Star Member
- Posts: 17
- Joined: Wed Apr 08, 2015 12:00 pm
Re: Kid's Hummer chair
You do some awesome work with the artwork for these chairs, I was dead set on building the semi one this weekend for my grandson, then I saw the Hummer and the Snoopy. Its now become a hard choice to pick the semi or the hummer. The snoopy is cool but he is into trucks, his favorite is the wrecker from the movie CARS. Know it may be a stretch but any way you may have the artwork for that one?. Or does anyone else have it.
Again awesome work.
Again awesome work.
- d2day
- 2.5 Star Member
- Posts: 114
- Joined: Wed Sep 17, 2014 7:59 pm
Re: Kid's Hummer chair
Awesome files, thanks for sharing...appreciate all the great work done here on Plasma Spider. It inspires me to do better, just learning plasma cutting and things that need to be different from router and laser type files. I have a lot of work I have done on those platforms but most need major modifications to use for plasma cutting. I am getting there and will try to share some of the simple stuff I have done soon. Thanks again for sharing your work and files.
SR
SR
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC