Tool & Garage Organization Thread
-
- 1.5 Star Member
- Posts: 39
- Joined: Wed May 21, 2014 7:56 pm
- Location: NW Arkansas
Re: Tool & Garage Organization Thread
Thanks everyone for sharing the files. I just moved my machine into a new shop and trying to get everything organized.
Kenny,
Kenny,
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Tool & Garage Organization Thread
This is a terrific thread and lots of great files/ideas here! Many thanks to all of you!
I have been working on a screwdriver/file rack for a few days now trying to develop my drawing and lay-out skills... If I ever get it right I will share it as well!
I have been working on a screwdriver/file rack for a few days now trying to develop my drawing and lay-out skills... If I ever get it right I will share it as well!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 1.5 Star Member
- Posts: 44
- Joined: Thu Aug 11, 2011 5:36 pm
Re: Tool & Garage Organization Thread
Recently bought a Harbor Freight tool cart to store all the tooling for my lathe. The tailstock has a MT4 taper, so I cut a rack for the tools.
-
- 2.5 Star Member
- Posts: 109
- Joined: Thu Jan 29, 2015 12:52 pm
Re: Tool & Garage Organization Thread
We modified a Spider file for paint can. Intalled it in the top of a new Milwaukie tool chest.
Enjoy
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
- exapprentice
- 3 Star Member
- Posts: 357
- Joined: Mon Jul 06, 2015 1:57 pm
- Location: Wiltshire, UK
Re: Tool & Garage Organization Thread
Absolutely Brilliant keep them coming, I love it
just goes to prove the saying:
Necessity is the mother of invention
just goes to prove the saying:
Necessity is the mother of invention
Best Regards to all
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
-
- 1.5 Star Member
- Posts: 29
- Joined: Thu Dec 24, 2015 9:19 am
Re: Tool & Garage Organization Thread
Thanks to everyone that contributed to the thread, a lot of awesome ideas.
-
- 1.5 Star Member
- Posts: 43
- Joined: Wed Oct 28, 2015 3:51 pm
Re: Tool & Garage Organization Thread
These will all come in very handy in keeping my tiny shop more organized, THANK YOU!
-
- 1/2 Star Member
- Posts: 4
- Joined: Tue Nov 17, 2015 6:30 pm
Re: Tool & Garage Organization Thread
great thread any more ideas????
-
- 2.5 Star Elite Contributing Member
- Posts: 132
- Joined: Sun Dec 08, 2013 3:53 pm
Re: Tool & Garage Organization Thread
Brew Worx wrote:Great thread guys. Here is another addition.
We modified a Spider file for paint can. Intalled it in the top of a new Milwaukie tool chest.
Enjoy
I've seen this on a thread can anyone help me locating this . Thanks in advance
-
- 1/2 Star Member
- Posts: 4
- Joined: Tue Sep 09, 2014 5:04 pm
Re: Tool & Garage Organization Thread
Thank you very much!!
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Tool & Garage Organization Thread
Modified the grinder rack to hold 3 grinders
Thanks mucho to the first poster!
Thanks mucho to the first poster!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 2.5 Star Elite Contributing Member
- Posts: 233
- Joined: Wed Feb 02, 2011 5:15 pm
- Location: Santa Anna Texas
- Contact:
Re: Tool & Garage Organization Thread
Here is a Collet Rack I made for my Mill. The bend lines are to be cut in it. I made mine out of 14ga. because that's what I had on the table.
Mike
Mike
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
-
- 2.5 Star Member
- Posts: 170
- Joined: Wed Nov 20, 2013 10:34 am
- Location: Louisiana
Re: Tool & Garage Organization Needed
Thanks for this share - trying to get organized and this will helpkkroger wrote:Air Tool Racks as I do them, also has a spot for the never present Air Tool Oil.
I powdercoat them in a single stage "Chrome" which is really just a silver not a two stage Chrome look.
I also do some in Black Wrinkle... The two end holes are 16" on center to fit stud C2C width.
I bend them in the sheet metal brake so there are no slots...
I also have a Visegrip rack that hangs them from the adjusting screw instead of the jaws.
ETA I make them from 18 ga sheet, works fine but I don't have the weakening brakeless bend slots.
-
- 2.5 Star Member
- Posts: 170
- Joined: Wed Nov 20, 2013 10:34 am
- Location: Louisiana
Re: Tool & Garage Organization Thread
thanks to all who shared their storage files - very much appreciated
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Oct 25, 2015 7:59 pm
Re: Tool & Garage Organization Thread
shop life key holder
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
ABLE CUTTING & FABRICATION
torchmate 4800
BATON ROUGE, LA
torchmate 4800
BATON ROUGE, LA
-
- 2 Star Member
- Posts: 66
- Joined: Sat Dec 26, 2015 12:14 pm
Re: Tool & Garage Organization Thread
Drew this up tonight. I have a hutch as well, but I spent a TON of time on it and hate giving it away. It should fit a KRA2422 snap on box or a 2421. Possibly more. 24" deep box using the handle mounting holes.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 107
- Joined: Wed Dec 11, 2013 3:21 am
Re: Tool & Garage Organization Thread
Can Anyone repost the Side rack to DXF?
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Nov 23, 2014 11:28 pm
Re: Tool & Garage Organization Thread
do you have a dxf for that binderman?
-
- 2 Star Member
- Posts: 66
- Joined: Sat Dec 26, 2015 12:14 pm
Re: Tool & Garage Organization Thread
Yeah I'll post it tonight
-
- 2.5 Star Member
- Posts: 179
- Joined: Sat Oct 23, 2010 5:22 pm
Re: Tool & Garage Organization Thread
Here is the DXF.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Tool & Garage Organization Thread
Thanks for the file! Would one of you Plasma can guys mind converting to DXF? Thanks!Bobcat320 wrote:Modified the grinder rack to hold 3 grinders
Thanks mucho to the first poster!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 2.5 Star Member
- Posts: 179
- Joined: Sat Oct 23, 2010 5:22 pm
Re: Tool & Garage Organization Thread
grinder rack in dxf
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Tool & Garage Organization Thread
Thanks!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 1/2 Star Member
- Posts: 1
- Joined: Tue Jan 19, 2016 3:40 pm
Re: Tool & Garage Organization Thread
AWESOME IDEAS TO ALL
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Jun 02, 2016 11:02 am
Re: Tool & Garage Organization Needed
dichdoc wrote:My new Favorite! I have always stored my big c clamps on the edge of this shelf. Takes to long to tighten them each down so they end up hanging there. All good until I reach behind them and they crash to the ground! Inspired by the vise grip rack posted I drew it up for my clamps (the first two on the left are bigger) I also clearanced two of my other clamps to fit the "standard" notch
Hello, First post, I was trying the c-clamp file from this thread. I get a partially complete drawing, is this so you can scale accordingly to required length or have I only got a fragment of the drawing.
Thanks,Ian