21' Gate
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
21' Gate
This one is about 21' wide and shipping back east. There are many little animals and bugs and such that cannot be seen in these pictures. Now off to the powder coaters. Well after I weld the hinges on tomorrow that is.
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: 21' Gate
Awesome piece of work!
I bet you went through a bunch of tips and electrodes by the time that was done.
Thank you for sharing this.
Dano
I bet you went through a bunch of tips and electrodes by the time that was done.
Thank you for sharing this.
Dano
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: 21' Gate
Fantastic work, I really like the thought and detail you put into these gates, even the way you create a touch of authenticity with the ice on the trailer you must get a lot of looks on the way to the powder coaters too.
Murray
Murray
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: 21' Gate
Thanks guys. I didn't even wear through a set of consumables. Then again they were genuine Hypertherm.
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: 21' Gate
Very impressive, bet that took some drawing up!
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: 21' Gate
Wow. Composition is excellent!
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: 21' Gate
Very nice! I think we have one powder coater in the local area (about 40 miles from me) with an oven big enough for that!
- chasxjs
- 2.5 Star Elite Contributing Member
- Posts: 225
- Joined: Sun Aug 24, 2014 10:50 pm
- Location: Lake Havasu City, Arizona
Re: 21' Gate
Great job. Very nice.
Charles
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
- Rockenjvdesign
- 2.5 Star Member
- Posts: 133
- Joined: Mon Jan 13, 2014 3:36 am
- Location: Gallup nam
Re: 21' Gate
that is some amazing work great job!!!!!!!!!!!!!!!!!!!!
Rocken JV Design We do it all
Plasma cam DHC2
hypertherm powermax 45
Custom furniture
Home décor
Plasma cam DHC2
hypertherm powermax 45
Custom furniture
Home décor
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: 21' Gate
All I can say is WOW! I just wish I had a driveway big enough to use a gate like that.
Steve
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1675
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: 21' Gate
Super nice job, Josh.
How long did it take to cut the panels? Do the CAD work?
Just curious.
How long did it take to cut the panels? Do the CAD work?
Just curious.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: 21' Gate
Thanks Dennis. I had all four panels cut in probably four hours or so. As far as drawing it up I probably spent 12 - 20 hours maybe? I didn't really keep track. I quoted him for the full job up front so didn't keep track of the hours but it was around there.
- East German
- 4 Star Elite Contributing Member
- Posts: 586
- Joined: Sat Jan 05, 2013 8:21 am
- Location: Stapelburg Germany
Re: 21' Gate
Wow!!
Its great!!
Regards Peter
Its great!!
Regards Peter
Sorry for my language! The last English class was in 1982.
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 333
- Joined: Mon Jul 25, 2011 9:30 pm
Re: 21' Gate
Great job !
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: 21' Gate
Thanks everyone for your comments. I appreciate your kindness.
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
-
- 2.5 Star Member
- Posts: 110
- Joined: Tue Jan 29, 2013 8:22 pm
Re: 21' Gate
That is a very beautiful gate my brother!!! You did a great job and something to be proud of!!?
What machine are you using to roll the top tube? I have been researching a lot of tubing rollers but I'm more confused now than I was before I started looking at them I prefer to hear honest ideas and recommendations from the talented brothers on here than anywhere else!!
What machine are you using to roll the top tube? I have been researching a lot of tubing rollers but I'm more confused now than I was before I started looking at them I prefer to hear honest ideas and recommendations from the talented brothers on here than anywhere else!!
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
Re: 21' Gate
Ok, I had to bring it up again and show the wife.....That is BAD ASS!!! Now she tills me I'm putting one up in the new year.... Pic's to follow. Again Nice Job.
Bob
Bob
The older I get, The better it was!
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: 21' Gate
I have a tube roller that oldsarge made, as in the oldsarge from this site/forum. He did an excellent job and it works awesome. That tube along the top was 2" x 2" x 16 gauge.
-
- 2.5 Star Member
- Posts: 110
- Joined: Tue Jan 29, 2013 8:22 pm
Re: 21' Gate
bigcreek wrote:I have a tube roller that oldsarge made, as in the oldsarge from this site/forum. He did an excellent job and it works awesome. That tube along the top was 2" x 2" x 16 gauge.
Awesome and thanks for your answer.. Great guys on this site!! I guess I'll holler at him
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3177
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: 21' Gate
That is absolutely beautiful!
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3177
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: 21' Gate
May I ask you what you charged for these gates?
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 2.5 Star Elite Contributing Member
- Posts: 215
- Joined: Thu Jul 18, 2013 3:05 pm
Re: 21' Gate
That gate is awesome. I would love to build us a gate but have never built gates before. What size material did you use to cut the panels out of? Also what do you use for hinges on something like that?