Driveway sign

[elkriverfab]

Here is a driveway sign I built.

It measures about 55 inches tall and 63 inches wide.

I built the frame from 40 year old 2 X 4's and 2 X 6's

Backed it with angle iron and welded loops for chain.

The scenes stand off the wood 3 inches (can't see it in the photo).

I also used a propane torch to burn the wood for a weathered look and to add depth.

Just thought I would share.

[plasmajoe]

Nice work Shawn, the Texas state contour on the gun is a terrific and fitting add on to your art.

Plasma Joe

[elkriverfab]

Nice work Shawn, the Texas state contour on the gun is a terrific and fitting add on to your art.

Plasma Joe

plasmajoe,

Thanks.

The sign feels like it weighs 100 lbs.
Where I want to hang it is about 30 feet off the ground.

This should be a fun one getting up there.

The wife will have a new helper project

We get some good winds here!

Going to chain it on top and each side (bottom corners).

It will probably end up in the living room (through the window) some day.