Hypertherm's new machine side cutting guide

Hypertherm Plasma Cutter discussion forum.
Post Reply
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Hypertherm's new machine side cutting guide

Post by jimcolt »

Hypertherm just released a new guide that can be printed and kept near your cnc plasma cutter or near your hand torch to assist you with choosing the right power level, the right consumable parts and the best cut quality with your system. This guide is specific to the Hypertherm Powermax 1000, 1250 and 1650 systems, and is easily downloadable and printable. I tried to upload the .pdf file to this post, but this site will not allow file sizes larger than 2 MB. If you drop me an email to my direct email, I would be happy to forward the .pdf files for these valuable guides!

Jim Colt jim.colt@hypertherm.com
Wine Country
2 Star Member
2 Star Member
Posts: 51
Joined: Fri Mar 27, 2009 9:10 pm
Location: Lodi, CA.

Re: Hypertherm's new machine side cutting guide

Post by Wine Country »

Good morning Jim. I was just on the Hypertherm website and looked in the download library. Couldn't locate the
side cutting guide. What would be the actual title of the guide. Thanks !
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: Hypertherm's new machine side cutting guide

Post by jimcolt »

I don't think the guide is on the website yet. If you send me your direct email, I'll send you a .pdf.

Jim Colt
WSS
3 Star Member
3 Star Member
Posts: 425
Joined: Wed Sep 29, 2010 12:19 am

Re: Hypertherm's new machine side cutting guide

Post by WSS »

Any one with a PowerMax 1000, 1250, 1650 should have this. It is in color and will allow you to compare your cuts and consumable condition to the pics listed in the pdf.

Thanks Jim!
Post Reply

Return to “Hypertherm Plasma Cutters”