Been doing most of my work in Inkscape but thinking of going to Corel X8. Does Corel work as well with SVG as it does with DXF ?
Thanks
Rick
Corel Draw X8
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Corel Draw X8
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Corel Draw X8
Yep, I use X8, was using X5 prior to upgrade about 6 weeks ago. Loved my X5 but now loving X8 even more. One of my graphic designers I have here was an Adobe only person until about 4 weeks ago, since starting here she now uses Corel almost exclusively and can't believe how much better it works for her. I think you will be pleasantly surprised at how quick and easy mostthings become.
Murray
Murray
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Corel Draw X8
Thanks Murray, I've heard it's a lot like Inkscape and I'm hoping that's so. Sure would make the change over a lot easier. What about it guys? Anyone familiar with both Inkscape and Corel? I would like to hear your thoughts on the subject.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Corel Draw X8
Corel works fine with SVG as well.
I don't think it's just as important now if you use sheetcam.
Sheetcam seems to import dxf drawings very well now, I have been using R14 format and haven't had any problems at all since recent updates.
I don't think it's just as important now if you use sheetcam.
Sheetcam seems to import dxf drawings very well now, I have been using R14 format and haven't had any problems at all since recent updates.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery