Jesus - Sermon On The Mount
- tomloewen
- 2.5 Star Elite Contributing Member
- Posts: 255
- Joined: Mon Mar 03, 2014 1:46 pm
- Location: Alberta Canada
Jesus - Sermon On The Mount
I started this file several months ago, and with Easter coming up I thought I better finish it up and post it.
And I need to thank Jason (MetalTorcher) for getting this file cleaned up and ready to cut. I enjoy drawing these files, but I don't have the software, nor the expertise to clean up the errors. Jason also did an exceptional clean up on another file of mine, "Four Horsemen" You can find it here
http://www.plasmaspider.com/viewtopic.p ... r+Horsemen
Jason and I played with the scaling a bit but finally just left it how I drew it up, which is about 36" X 34"
I'm REALLY interested in seeing what you guys do with this file . . . there's a lot of creative members out there. Please post your work, and thanks.
Tom
And I need to thank Jason (MetalTorcher) for getting this file cleaned up and ready to cut. I enjoy drawing these files, but I don't have the software, nor the expertise to clean up the errors. Jason also did an exceptional clean up on another file of mine, "Four Horsemen" You can find it here
http://www.plasmaspider.com/viewtopic.p ... r+Horsemen
Jason and I played with the scaling a bit but finally just left it how I drew it up, which is about 36" X 34"
I'm REALLY interested in seeing what you guys do with this file . . . there's a lot of creative members out there. Please post your work, and thanks.
Tom
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 464
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: Jesus - Sermon On The Mount
wow thats nice thanks for the share
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Jesus - Sermon On The Mount
WOW! That would take my machine about 10 hours to cut lol
-
- 2.5 Star Elite Contributing Member
- Posts: 166
- Joined: Thu Jun 16, 2011 9:19 am
- Location: Marshfield, MA.
- Contact:
Re: Jesus - Sermon On The Mount
Nice file, very clean and will take 2.25 hrs @ quality 3 to cut in 14ga in the waterjet. 328 pierces.
Omax 80X Waterjet 6 x 12 with Tilt-A-Jet
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Re: Jesus - Sermon On The Mount
Thank you Tomloewen for sharing a great file. I will be cutting one soon and will clean and post it.
- tomloewen
- 2.5 Star Elite Contributing Member
- Posts: 255
- Joined: Mon Mar 03, 2014 1:46 pm
- Location: Alberta Canada
Re: Jesus - Sermon On The Mount
Thanks! I'd love to see itseajinx wrote:Thank you Tomloewen for sharing a great file. I will be cutting one soon and will clean and post it.
- little blue choo
- 4 Star Member
- Posts: 1461
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Jesus - Sermon On The Mount
Love this file but don't think I could stay awake long enough to cut. LOL
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 499
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Jesus - Sermon On The Mount
WOW! Thanks for sharing it.
- tomloewen
- 2.5 Star Elite Contributing Member
- Posts: 255
- Joined: Mon Mar 03, 2014 1:46 pm
- Location: Alberta Canada
Re: Jesus - Sermon On The Mount
You bet. I'm thinking of doing a David & Goliath next . . . see how it goes.hdfaster wrote:WOW! Thanks for sharing it.
-
- 1.5 Star Member
- Posts: 41
- Joined: Mon Dec 30, 2013 3:02 pm
Re: Jesus - Sermon On The Mount
Looks great!
"Blessed are the poor in spirit, for theirs is the kingdom of heaven."
Matt. 5:3
Thanks,
Scott
"Blessed are the poor in spirit, for theirs is the kingdom of heaven."
Matt. 5:3
Thanks,
Scott
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Jesus - Sermon On The Mount
very nice thank you
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1703
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Jesus - Sermon On The Mount
awesome post
- tomloewen
- 2.5 Star Elite Contributing Member
- Posts: 255
- Joined: Mon Mar 03, 2014 1:46 pm
- Location: Alberta Canada
Re: Jesus - Sermon On The Mount
yep.Scott F. wrote:Looks great!
"Blessed are the poor in spirit, for theirs is the kingdom of heaven."
Matt. 5:3
Thanks,
Scott
-
- 3 Star Elite Contributing Member
- Posts: 370
- Joined: Sun Jul 13, 2014 12:49 pm
Re: Jesus - Sermon On The Mount
very very nice thank you
-
- 1.5 Star Member
- Posts: 37
- Joined: Tue Nov 11, 2014 5:13 pm
Re: Jesus - Sermon On The Mount
Thanks for sharing!
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Jesus - Sermon On The Mount
Good job and thank you..shows 55 min cut cycle with a little over 300 pierces if cut from 10g with fine cut consumables...my nieghbor is big with his church and they were asking me about a new sign. Might see if they like it and just charge them material cost just to see it cut. If they do I will post it up.
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
- tomloewen
- 2.5 Star Elite Contributing Member
- Posts: 255
- Joined: Mon Mar 03, 2014 1:46 pm
- Location: Alberta Canada
Re: Jesus - Sermon On The Mount
I'd love to see it!HammerDownJustin wrote:Good job and thank you..shows 55 min cut cycle with a little over 300 pierces if cut from 10g with fine cut consumables...my nieghbor is big with his church and they were asking me about a new sign. Might see if they like it and just charge them material cost just to see it cut. If they do I will post it up.
-
- 2.5 Star Member
- Posts: 123
- Joined: Wed Jun 01, 2016 5:57 pm
Re: Jesus - Sermon On The Mount
Awesome... We need more God in our lives today!!!
Best Regards,
Mike Volpone
MJV Graphics
CorelDraw X7
SolidWorks 2014
Coming soon: ShopSabre SideKick 8 w/ 6" Pipe Attachment
and HyperTherm 105
Mike Volpone
MJV Graphics
CorelDraw X7
SolidWorks 2014
Coming soon: ShopSabre SideKick 8 w/ 6" Pipe Attachment
and HyperTherm 105
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Re: Jesus - Sermon On The Mount
Thanks tomloewen for sharing.
-
- 1 Star Member
- Posts: 11
- Joined: Thu Jan 21, 2016 9:10 pm
Re: Jesus - Sermon On The Mount
Very nice. Thanks for the share.
- see&see
- 2.5 Star Member
- Posts: 218
- Joined: Tue Jun 24, 2014 12:04 pm
- Location: Minden, Nevada
- Contact:
Re: Jesus - Sermon On The Mount
Very nice file, thanks! God Bless
You marry into the PlasmaCam family and must accept the fact your software and hardware are proprietary. It's a for better or for worse engagement with overwhelming security. PlasmaCam controls the computer, table, hardware to their advantage IMO.
-
- 2.5 Star Elite Contributing Member
- Posts: 204
- Joined: Tue Jun 08, 2010 5:51 pm
Re: Jesus - Sermon On The Mount
Great looking file! Thanks for the share.
Homemade 36X36 table
Can go from Plasma to Router in 10 Minutes
American Modified Chinese Controller
Proma Electronics THC
Cambam and Mach3
Longevity Forcecut 40D
Miller 211 MIG Welder
Can go from Plasma to Router in 10 Minutes
American Modified Chinese Controller
Proma Electronics THC
Cambam and Mach3
Longevity Forcecut 40D
Miller 211 MIG Welder
- ROKCRLER
- 3 Star Elite Contributing Member
- Posts: 645
- Joined: Sun Sep 30, 2018 5:19 pm
Re: Jesus - Sermon On The Mount
Thank you Tomloewen for the file!
I scaled this down to 25"x25.5", had to delete a few tiny details, struggled with finecuts again, swapped to 45a reg consumables and rocked out. I did have a few areas that burned out but overall looks stunning.
I scaled this down to 25"x25.5", had to delete a few tiny details, struggled with finecuts again, swapped to 45a reg consumables and rocked out. I did have a few areas that burned out but overall looks stunning.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
4x8 Dynatorch
PM85
~Mo~
PM85
~Mo~
-
- 5 Star Elite Contributing Member
- Posts: 2690
- Joined: Thu Jul 24, 2008 11:15 am
Re: Jesus - Sermon On The Mount
Wow! Definately looks stunning Mo, well done, and thanks for the file Tomloewen
-
- 3 Star Elite Contributing Member
- Posts: 465
- Joined: Sat Nov 11, 2017 8:57 am
- Location: Wisconsin
Re: Jesus - Sermon On The Mount
Thanks for the share! You both did great work! Nice clean file!
ROKCRLER Your down sized one looks great too!
I 'm thinking of doing it in 14ga and it shows 21min 36 sec cut time! But I see I have 4 open paths not cutting, still have a little editing to check for drops or burnouts!
Jeff
ROKCRLER Your down sized one looks great too!
I 'm thinking of doing it in 14ga and it shows 21min 36 sec cut time! But I see I have 4 open paths not cutting, still have a little editing to check for drops or burnouts!
Jeff
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Jeff S.
J-SIG Manufacturing
J-SIG Manufacturing