Price check??
-
- 2 Star Member
- Posts: 55
- Joined: Tue Jul 07, 2015 8:10 am
Price check??
I came up with 14 pierce points and 175 cut inches on 3/8 plate. The customer will provide the metal and needs three of them. I came up with $220. Is this close or what is everyones take on it.
LDR 4x8 w scribe
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32
-
- 3.5 Star Elite Contributing Member
- Posts: 520
- Joined: Fri Nov 14, 2008 10:20 am
Re: Price check??
Using my Excel pricing spreadsheet I would be at $71.75 each.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1678
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Price check??
If you post the dxf I can run it through SheetCam and my pricing program which was created and posted on this site by davek.
http://plasmaspider.com/viewtopic.php?f=88&t=17569
http://plasmaspider.com/viewtopic.php?f=88&t=17569
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2 Star Member
- Posts: 55
- Joined: Tue Jul 07, 2015 8:10 am
Re: Price check??
I told the customer 220 he was more than willing to pay that. I use the excel sheet for my stuff I just haven't got into a lot of industrial stuff. THanks for the help guys. Now to see if he pays in a timely manner ![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
LDR 4x8 w scribe
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32
-
- 1 Star Member
- Posts: 11
- Joined: Sun Jul 17, 2016 3:04 am
- Location: alaska
Re: Price check??
THANKYOU, THANKYOU, THANKYOU!!!!!!!!!!!!!!!!!!!!!
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1678
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Price check??
Ummm, have him pay in full or 75% before you do anything!!!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com