GM Corporate 14 Bolt drawings.

Ratboyracer · Post by **Ratboyracer** » Sun Dec 03, 2017 9:27 pm

Here are a few Items for the 14 bolt I drew up. I have a few axle tabs, disc brake mounts, pinion guard, and full length truss also. Enjoy and fill free to improve on it and repost.

14 Bolt Parts.dxf

crosbike · Post by **crosbike** » Sun Dec 03, 2017 9:47 pm

awesome thanks for sharing

Ratboyracer · Post by **Ratboyracer** » Sun Dec 03, 2017 9:54 pm

crosbike wrote:awesome thanks for sharing

no problem!

I am in the process of building a crawler so I have been drawing and cutting as I go. I should have a diff cover done this week also. I will post it here when I finish it.

Steelcut · Post by **Steelcut** » Mon Dec 04, 2017 6:19 pm

Thanks, this will save me some time!

Ratboyracer · Post by **Ratboyracer** » Wed Dec 06, 2017 7:54 am

I got the diff cover drawn up yesterday. Once I get some final touches done I will post it up!

Ratboyracer · Post by **Ratboyracer** » Wed Dec 06, 2017 9:36 pm

Here is a Diff Cover for the 14 bolt I have drawn up. I have not cut nor broke up to check how close it is, so it is not perfect and may require some trimming. I am hoping to get it cut and broke up tomorrow. Enjoy and let me know how it worked out if you get to it before I do.

14BoltDiffCover.dxf

lunati397 · Post by **lunati397** » Sat Dec 16, 2017 6:00 pm

are you still sharing the file?

dustyscustomwelding · Sat Dec 23, 2017 10:58 am

Bad Links?

Ratboyracer · Post by **Ratboyracer** » Sat Dec 23, 2017 11:11 am

Sorry guys, I will post them up again when I get back to the house. I've been MIA for a bit. I have yet to burn them out and check the fit, if you get them burnt and broke up, let me know how they fit if you would!

Ratboyracer · Post by **Ratboyracer** » Sat Dec 23, 2017 7:10 pm

14 Bolt All Parts-ratboyracer.dxf

Here ya go guys! post some pictures when you get them done!

EDIT! the two side left holes on the diff cover bolt pattern are off about half a hole too high. Make sure you correct before burning until I can get it re-uploaded.

**My drawings are for your personal use, please do not sell my designs.**

Ratboyracer

nalin400m · Post by **nalin400m** » Sat Dec 23, 2017 8:05 pm

What angles would you bend it? 29 and 37?

noclinkers · Post by **noclinkers** » Sun Dec 24, 2017 8:05 pm

Thank you sir!

Bradley · Post by **Bradley** » Sun Dec 24, 2017 8:39 pm

thank you for creating and sharing

Uzaree · Post by **Uzaree** » Sun Jan 14, 2018 11:58 pm

Thanks for sharing this. Was in the process of drawing this up

yroc fab · Post by **yroc fab** » Mon Jan 15, 2018 1:49 am

I cut out one of your 14 bolt covers and the two left bolt holes where off set about a half a hole, I slotted them out and made it work, everything else about them fit up really good. The two holes i mentioned should line up vertically with the two holes on the right. If i cut out another one in the future i will fix and repost it. Thanks op for the share.

Ratboyracer · Post by **Ratboyracer** » Mon Jan 15, 2018 1:12 pm

yroc fab wrote:I cut out one of your 14 bolt covers and the two left bolt holes where off set about a half a hole, I slotted them out and made it work, everything else about them fit up really good. The two holes i mentioned should line up vertically with the two holes on the right. If i cut out another one in the future i will fix and repost it. Thanks op for the share.

Thanks for finding that! I will fix it and repost! I'm glad the rest of it fit up ok. Post a picture when you get it welded up!

Ratboyracer

DezertBlingMoto · Post by **DezertBlingMoto** » Mon Jan 15, 2018 8:03 pm

what is everyone using to bend that gauge ? just curious in the market to find correct break. Thanks in advance.

yroc fab · Post by **yroc fab** » Wed Jan 17, 2018 12:19 am

DezertBlingMoto wrote:what is everyone using to bend that gauge ? just curious in the market to find correct break. Thanks in advance.

Look into a swag press brake kit. I have built many similar to what they sale just for pressing certain repeat items.

Ratboyracer wrote:Thanks for finding that! I will fix it and repost! I'm glad the rest of it fit up ok. Post a picture when you get it welded up!

Ratboyracer

Best picture i got. Dont mind the crooked u bolt, that got fixed. Thread>https://www.rme4x4.com/threads/brians-b ... dd.114115/

f.jpg

Ratboyracer · Post by **Ratboyracer** » Wed Jan 17, 2018 10:21 am

Finally got it burnt and broke up. Fit together fairly nice but needs a little grinding depending how you want it placed on the ring. I used 3/8" HR.

20180117_081127.jpg

20180117_081136.jpg

Ratboyracer · Post by **Ratboyracer** » Fri Jan 26, 2018 7:45 pm

20180120_173740.jpg

DezertBlingMoto · Post by **DezertBlingMoto** » Mon Feb 05, 2018 10:37 pm

thank you for the reply will definitely do so

oldmountaincrafts · Post by **oldmountaincrafts** » Mon Apr 08, 2019 4:51 pm

Hey, thanks for the file. I'm having a problem opening the file. It keeps saying it's not a valid file format. I'm using Illustrator. Could be me, but thought I'd ask.

Thanks!!

Post by **cetane** » Mon Apr 08, 2019 10:55 pm

Hell yeah, thanks.

Ricky4xfour · Post by **Ricky4xfour** » Mon Jun 17, 2019 2:15 pm

I'm having trouble opening all the files as well. im was trying to download the axle truss and diff cover. Can you please email me the files at r.arana13@yahoo.com please thanks.

Post by **ggeh** » Mon Jun 17, 2019 6:48 pm

Thanks for sharing a drawing that had to take a lot of your time and effort to complete. It opened fine with sheetcam for me.
Excellent work thank you.

GM Corporate 14 Bolt drawings.

GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.

Re: GM Corporate 14 Bolt drawings.