These are older pics of my 4X4 Tourchmate machine, I now have a machine tourch but still dont run a arc voltage hight control. I dont cut much under about .18 ga. so I just use weights to keep the material flat. It works for me
-
-
Weekly Free DXF Design
-
Download DXF/SVG
Lets see your machine at WORK!
-
Burnt
- 1.5 Star Member
- Posts: 39
- Joined: Mon Apr 25, 2011 5:32 pm
- Location: Arizona
Lets see your machine at WORK!
I'd like to see everyones set ups, please post some pics!
These are older pics of my 4X4 Tourchmate machine, I now have a machine tourch but still dont run a arc voltage hight control. I dont cut much under about .18 ga. so I just use weights to keep the material flat. It works for me
These are older pics of my 4X4 Tourchmate machine, I now have a machine tourch but still dont run a arc voltage hight control. I dont cut much under about .18 ga. so I just use weights to keep the material flat. It works for me
-
ou812
- 2.5 Star Elite Contributing Member
- Posts: 190
- Joined: Wed Feb 25, 2009 11:18 am
- Location: Knoxville Tn.
Re: Lets see your machine at WORK!
here is one we have now
http://www.plasmaspider.com/viewtopic.p ... =829#p2123
http://youtu.be/Zkb_U5I9_JE
http://youtu.be/PQc2WVDyweo
http://youtu.be/56zbN36hQiE
http://www.plasmaspider.com/viewtopic.p ... =829#p2123
http://youtu.be/Zkb_U5I9_JE
http://youtu.be/PQc2WVDyweo
http://youtu.be/56zbN36hQiE
- Attachments
-
- IMG_1089.JPG (13.3 KiB) Viewed 1787 times
- IMG_1089.JPG (13.3 KiB) Viewed 1787 times
-
- IMG_1088.jpg (49.98 KiB) Viewed 1787 times
- IMG_1088.jpg (49.98 KiB) Viewed 1787 times
Last edited by ou812 on Thu Aug 25, 2011 1:19 pm, edited 3 times in total.
-
Burnt
- 1.5 Star Member
- Posts: 39
- Joined: Mon Apr 25, 2011 5:32 pm
- Location: Arizona
Re: Lets see your machine at WORK!
ou812 wrote:here is one we have now
http://www.plasmaspider.com/viewtopic.p ... =829#p2123
Pretty cool!
When you need stairs to access it and a crane to load it, that's a serrious machine!
-
bzzboyz
- 1.5 Star Member
- Posts: 45
- Joined: Sun Apr 11, 2010 5:36 pm
-
ericandmollie
- 2.5 Star Elite Contributing Member
- Posts: 112
- Joined: Wed Oct 28, 2009 4:45 pm
Re: Lets see your machine at WORK!
Here is my baby
-
bgmachine
- 1 Star Member
- Posts: 17
- Joined: Thu Jul 16, 2009 10:48 am
- Location: 3801 Gilmore Ave,Bakersfield,Ca.
- Contact:
Re: Lets see your machine at WORK!
Our 6'x12' water table
- Attachments
-
-
- BG action.JPG (54.61 KiB) Viewed 2007 times
- BG action.JPG (54.61 KiB) Viewed 2007 times
