I was asked just how big of a drawing board could one use to trace out templates or ideas
well this shows my setup , have traced sailboats full sized
downloaded Logic Trace and will show configuring a 4 drawing board layout including the tests and a quick line tracing to demo 4 board use
https://stankern.vids.io/videos/709fd9b ... figuration
Logic Trace jumbo 4 drawing board configuration
-
- 2 Star Member
- Posts: 95
- Joined: Fri May 12, 2017 12:02 pm
-
- 5 Star Elite Contributing Member
- Posts: 2621
- Joined: Thu Jul 24, 2008 11:15 am
Re: setting up a jumbo 4 configuration drawing board
Now that is pretty slick! Not sure I would ever have a use for that but I am sure someone does. Impressive.
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Logic Trace jumbo 4 drawing board configuration
Interesting setup.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 4.5 Star Elite Contributing Member
- Posts: 1820
- Joined: Mon Jun 12, 2017 6:43 pm
Re: Logic Trace jumbo 4 drawing board configuration
wow that must have cost a lot, my eyes watered years ago when I saw the cost of them
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Logic Trace jumbo 4 drawing board configuration
I bought the 44x60" board YEARS ago, and I have not set it up YET. It is still in the original shipping box in my shop, mocking me. I hope it will serve me well, when I finally add it to my bag-o-tricks.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 2 Star Member
- Posts: 95
- Joined: Fri May 12, 2017 12:02 pm
Re: Logic Trace jumbo 4 drawing board configuration
these boards make it simple to trace out ideas and produce a useable file for machines
-
- 6 Star Elite Contributing Member
- Posts: 8775
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Logic Trace jumbo 4 drawing board configuration
Nice work Stan! I have several of the GTCO CalComp digitizing boards which I do use occasionally. Combined with John's Logictrace software, they do work quite well. My largest is the 44 x 60, which is the size you have linked together to create your 44 x 240 active area. My smallest one is 12 x 18, and I have one mid-sized about 36 x 48. Keep up the great demonstration videos! John should put you on his payroll.
David
David